DH9060P2 - Heat pump Fisher & Paykel - Free user manual and instructions
Find the device manual for free DH9060P2 Fisher & Paykel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat Pump Dryer |
| Brand | Fisher & Paykel |
| Model | DH9060P2 |
| Capacity | 9 kg |
| Dimensions (H x W x D) | 850 mm x 600 mm x 600 mm |
| Weight | 50 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 1500 W |
| Energy Efficiency Class | A++ |
| Drying Technology | Heat Pump |
| Sensor Drying | Yes |
| Reverse Tumbling | Yes |
| Noise Level | 64 dB(A) |
| Installation Type | Freestanding or stackable |
| Filter Type | Lint filter (easy clean) |
| Condenser Cleaning | Self-cleaning condenser |
| Drum Material | Stainless steel |
| Control Type | Electronic with LED display |
| Number of Programs | 16 |
| Delay Start | Yes, up to 24 hours |
| Child Lock | Yes |
| Warranty | 2 years parts and labor |
Frequently Asked Questions - DH9060P2 Fisher & Paykel
How do I clean the lint filter on the Fisher & Paykel DH9060P2?
The lint filter is located inside the door opening. Pull it out, remove lint by hand or with a soft brush, and rinse under water if needed. Allow to dry completely before reinserting.
What is the drying capacity of the DH9060P2?
The maximum drying capacity is 9 kg for cotton items. For synthetics, the load should be smaller, typically half the drum volume.
How do I use the delay start function?
Program your desired cycle, then press the delay start button to set a delay from 1 to 24 hours. The dryer will start automatically at the set time.
Why is my dryer not heating properly?
Check if the lint filter or condenser is clogged. Also ensure the heat pump filter is clean. If the problem persists, there may be a fault with the heat pump system; contact service.
Can I stack the DH9060P2 on a washing machine?
Yes, this dryer can be stacked using a compatible stacking kit (sold separately). Ensure the washing machine is of similar dimensions and weight capacity.
How often should I clean the condenser?
The DH9060P2 has a self-cleaning condenser, but it is recommended to check and manually clean the condenser filter every 6 months or as indicated by the dryer.
What programs are available on the DH9060P2?
Programs include Cotton, Synthetics, Delicates, Wool, Bed & Bath, Quick 30 min, Active Wear, Silk, Shirts, Jeans, etc. Refer to the manual for the full list.
Is the DH9060P2 energy efficient?
Yes, it is rated A++ energy efficiency class. The heat pump technology uses less energy compared to conventional vented or condenser dryers.
What should I do if the dryer displays an error code?
Error codes are shown on the display. Common codes like E1 (water tank full) or E2 (clogged filter) can be resolved by emptying the tank or cleaning filters. For other codes, consult the manual or contact customer service.
How do I enable the child lock?
Press and hold the child lock button (usually indicated by a padlock icon) for 3 seconds to lock the control panel. Repeat to unlock.
User questions about DH9060P2 Fisher & Paykel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual DH9060P2 - Fisher & Paykel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DH9060P2 by Fisher & Paykel.
USER MANUAL DH9060P2 Fisher & Paykel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fisher & Paykel
Model : DH9060P2
Category : Heat pump