Draper

23828 - Air Conditioning Draper - Free user manual and instructions

Find the device manual for free 23828 Draper in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Draper 23828 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypePortable Air Conditioner
Model Number23828
BrandDraper
Cooling Capacity12000 BTU/h
Power Supply220-240V ~ 50Hz
Dimensions (W x D x H)45 x 35 x 70 cm
Weight25 kg
Airflow Rate300 m³/h
Noise Level55 dB
Energy Efficiency ClassA
RefrigerantR32
ModesCool, Fan, Dehumidify
Remote ControlIncluded
Timer24-hour programmable
Filter TypeWashable mesh
Drain MethodManual or continuous
Operating Temperature Range16°C – 30°C
Safety FeaturesOverload protection, auto restart
MaintenanceClean filter every 2 weeks
Included AccessoriesWindow kit, drain hose, remote control

Frequently Asked Questions - 23828 Draper

How to install the Draper 23828 air conditioner?
Install the exhaust hose in a window using the included window kit. Ensure the unit is on a level surface and plug into a grounded outlet. Allow 2 hours before first use if transported horizontally.
How often should I clean the air filter?
Clean the washable filter every two weeks. Remove the filter, rinse with water, dry completely, and reinstall. A clean filter ensures optimal cooling efficiency.
How to drain water from the unit?
The unit has a manual drain plug at the bottom. For continuous drainage, attach a hose to the drain outlet. Drain water when the tank is full to avoid automatic shutdown.
How to set the timer?
Press the Timer button on the remote or control panel. Use + or - to set the desired hours (1-24). The unit will turn on or off after the set time.
What does error code E1 mean?
Error E1 indicates a temperature sensor malfunction. Turn off the unit, unplug for 5 minutes, and restart. If persists, contact customer service.
Can I use the air conditioner without the window kit?
The window kit is required for proper exhaust ventilation. Without it, hot air recirculates, reducing cooling performance. You can use a sliding door or custom vent as alternative.
How to store the unit in winter?
Drain all water, clean the filter, and dry the interior. Store in a dry place above 0°C. Cover to protect from dust.
Why is the air conditioner not cooling?
Check if the filter is clean, the exhaust hose is not blocked, the window kit is sealed, and the set temperature is lower than room temperature. Also ensure the mode is set to Cool.
How to change the temperature unit from Celsius to Fahrenheit?
Press and hold the Mode button for 3 seconds. The display will toggle between °C and °F. Release when desired unit appears.
Is the Draper 23828 energy efficient?
Yes, it has Energy Efficiency Class A. It uses R32 refrigerant which is more eco-friendly. Proper maintenance further improves efficiency.

User questions about 23828 Draper

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air Conditioning in PDF format for free! Find your manual 23828 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 23828 by Draper.

USER MANUAL 23828 Draper

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Draper

Model : 23828

Category : Air Conditioning