23830 - Air Conditioning Draper - Free user manual and instructions
Find the device manual for free 23830 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Model | 23830 |
| Brand | Draper |
| Cooling Capacity | 9000 BTU/h |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption (Cooling) | 1000 W |
| Airflow Rate | 350 m³/h |
| Noise Level | ≤ 65 dB(A) |
| Dimensions (W x D x H) | 35 x 40 x 75 cm |
| Weight | 25 kg |
| Refrigerant | R290 (Propane) |
| Operating Modes | Cooling, Fan, Dehumidification |
| Fan Speeds | 3 (Low, Medium, High) |
| Timer | 1-24 hours |
| Remote Control | Yes (incl. battery) |
| Air Filter | Washable dust filter |
| Water Drainage | Continuous drain hose (optional), manual drain |
| Casters | 4 swivel casters |
| Window Kit | Included (exhaust hose + adapter) |
| Energy Efficiency | Class A |
| Warranty | 2 years |
Frequently Asked Questions - 23830 Draper
How do I install the portable air conditioner?
Place the unit near a window. Attach the exhaust hose to the rear outlet and extend it to the window. Use the included window kit to seal the opening. Ensure the hose is straight and not kinked. Plug into a grounded outlet.
Do I need to drain the water tank?
The unit is self-evaporative in most conditions. However, in high humidity, water may collect. When the 'Full Tank' indicator lights, manually drain through the bottom plug or connect a continuous drain hose.
How often should I clean the air filter?
Clean the dust filter every two weeks under normal use. Remove the filter, vacuum or rinse with water, dry thoroughly before reinstalling. A dirty filter reduces efficiency.
What does the error code E1 mean?
Error code E1 indicates a temperature sensor fault. Turn off the unit, unplug, wait 10 minutes, and restart. If the error persists, contact customer service.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose must always be vented outside. Operating without it can cause the unit to overheat and reduce cooling performance.
What is the recommended room size?
The unit is suitable for rooms up to 25 m² (270 sq ft) with a ceiling height of 2.5 m.
How do I set the timer?
Press the Timer button on the remote or control panel. Use +/- to set the hours (1-24). The unit will automatically start or stop after the set time depending on mode.
Why is the unit not cooling?
Check that the exhaust hose is not blocked or kinked. Ensure the filter is clean. Verify the set temperature is lower than room temperature. If the compressor doesn't start, wait 3 minutes (protection delay).
Can I leave the unit unattended?
Yes, the unit has an auto-restart function after power failure. However, always ensure the drain tank is not full if not using continuous drain.
What is the warranty period?
The Draper 23830 comes with a 2-year warranty covering manufacturing defects. Keep your proof of purchase.
User questions about 23830 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual 23830 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 23830 by Draper.
USER MANUAL 23830 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 23830
Category : Air Conditioning