KS 80 - Pump Könner & Söhnen - Free user manual and instructions
Find the device manual for free KS 80 Könner & Söhnen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | Könner & Söhnen |
| Model | KS 80 |
| Power Source | Electric (230 V AC) |
| Power Consumption | 800 W |
| Max Flow Rate | 60 L/min |
| Max Head | 8 m |
| Max Immersion Depth | 5 m |
| Housing Material | Stainless Steel / Cast Iron |
| Impeller Material | Engineering Plastic |
| Outlet Size | 1 inch (25.4 mm) |
| Inlet Size | 1 inch (25.4 mm) |
| Cable Length | 10 m |
| Weight | 7.5 kg |
| Dimensions (L x W x H) | 25 cm x 18 cm x 30 cm |
| Protection Rating | IP68 |
| Operating Temperature | 5°C to 40°C |
| Noise Level | 65 dB(A) |
Frequently Asked Questions - KS 80 Könner & Söhnen
What is the maximum flow rate of the KS 80 pump?
The KS 80 pump can deliver up to 60 liters per minute under optimal conditions.
Can this pump be used with dirty water?
Yes, the KS 80 is designed for clear and slightly dirty water with particles up to 5 mm. For heavily contaminated water, a different pump type is recommended.
How do I prime the pump?
Submerge the pump completely in water to remove air. Ensure the outlet hose is free of kinks. The pump is self-priming once submerged.
What maintenance does the pump require?
Regularly clean the inlet filter and check the impeller for debris. After use, flush with clean water and store in a dry place. Lubrication is not required.
Is the KS 80 suitable for continuous operation?
It is rated for intermittent use (e.g., max 10 minutes on, then cool down). For continuous duty, a different model may be needed.
What is the maximum head height?
The maximum head is 8 meters vertically. Performance decreases with longer hose runs or higher lifts.
Can I use the pump without a strainer?
No, always use the supplied strainer to prevent debris from damaging the impeller. Running without it voids the warranty.
Does the pump have thermal protection?
Yes, the motor includes an automatic thermal cut-off to prevent overheating. It will restart once cooled.
What size hose fits the outlet?
The outlet is 1 inch (25.4 mm) in diameter. Use a hose with a matching female connector or an adapter.
How do I winterize the pump?
Drain all water from the pump and hoses. Store in a frost-free environment to prevent damage from freezing.
User questions about KS 80 Könner & Söhnen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual KS 80 - Könner & Söhnen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KS 80 by Könner & Söhnen.
USER MANUAL KS 80 Könner & Söhnen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Könner & Söhnen
Model : KS 80
Category : Pump