KS 50 - Pump Könner & Söhnen - Free user manual and instructions
Find the device manual for free KS 50 Könner & Söhnen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Power | 500 W |
| Voltage | 230 V ~ 50 Hz |
| Max Flow Rate | 50 L/min |
| Max Head | 10 m |
| Outlet Diameter | 1 inch (25 mm) |
| Inlet Diameter | 1 inch (25 mm) |
| Material | Cast Iron / Stainless Steel |
| Weight | 8 kg |
| Dimensions (L x W x H) | 30 x 15 x 20 cm |
| Protection Class | IPX4 |
| Insulation Class | F |
| Max Liquid Temperature | 35°C |
| Cable Length | 1.5 m |
| Noise Level | 70 dB |
| Self-Priming | Yes |
| Usage | Garden, Irrigation, Drainage |
| Maintenance | Regular cleaning of filter |
| Safety Features | Overheat protection |
| Spare Parts | Impeller, mechanical seal, capacitor |
| Warranty | 2 years |
Frequently Asked Questions - KS 50 Könner & Söhnen
How do I prime the pump before use?
To prime the KS 50 pump, fill the pump casing and suction pipe with water before starting. Ensure the suction line is submerged and free of air leaks. Refer to the manual for detailed priming instructions.
Can the pump run dry?
No, running the pump dry can damage the mechanical seal and cause overheating. Always ensure the pump is filled with water before operation.
What fluids can I pump with the KS 50?
This pump is designed for clean water and non-aggressive liquids. It should not be used for flammable, corrosive, or abrasive fluids.
How do I clean the pump?
Disconnect the pump from power. Remove the filter and rinse with clean water. Wipe the exterior with a damp cloth. Do not use chemical cleaners.
What is the maximum head of the KS 50?
The maximum head is 10 meters. Performance decreases with increased head; check the pump curve in the manual for exact flow rates at different heads.
Is the KS 50 suitable for drinking water?
This pump is not certified for potable water. Use only for irrigation, drainage, or other non-potable applications.
How loud is the pump during operation?
The noise level is approximately 70 dB, similar to a normal conversation. Ensure proper installation to minimize vibration noise.
What should I do if the pump loses pressure?
Check for air leaks in the suction line, ensure the inlet is not blocked, and verify the impeller is not damaged. Also check the voltage supply.
How do I replace the mechanical seal?
Replacing the mechanical seal requires disassembly. Disconnect power, remove the pump casing, and carefully replace the seal. For detailed steps, consult the service manual.
What is the warranty period for the KS 50?
Könner & Söhnen offers a 2-year warranty from the date of purchase against manufacturing defects. Keep your receipt as proof of purchase.
User questions about KS 50 Könner & Söhnen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual KS 50 - Könner & Söhnen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KS 50 by Könner & Söhnen.
USER MANUAL KS 50 Könner & Söhnen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Könner & Söhnen
Model : KS 50
Category : Pump