6200F - Network card Aruba - Free user manual and instructions
Find the device manual for free 6200F Aruba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch (Network Card) |
| Brand | Aruba |
| Model | 6200F |
| Dimensions (W x D x H) | 44.2 x 20.4 x 4.4 cm |
| Weight | 3.5 kg |
| Power Supply | 100-240 V AC, 50-60 Hz |
| Power Consumption | 120 W (maximum) |
| Number of Ports | 24 |
| Port Type | 10/100/1000BASE-T Gigabit Ethernet |
| Uplink Ports | 4 x 1/10 SFP+ |
| Layer Support | Layer 2+ (Static Routing) |
| Switching Capacity | 128 Gbps |
| MAC Address Table | 32,000 entries |
| VLAN Support | Up to 4094 VLANs |
| Management Interfaces | CLI, Web GUI, SNMP, REST API |
| Cooling Method | Internal fans with smart cooling |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Humidity Range | 10% to 90% non-condensing |
| Safety Certifications | UL, CE, FCC |
| Included Accessories | Power cord, rack mount kit, console cable |
| Maintenance Instructions | Clean with a dry, lint-free cloth. Do not use liquids. |
| Repairability | No user-serviceable parts. Contact Aruba Support for repairs. |
Frequently Asked Questions - 6200F Aruba
How do I reset the Aruba 6200F to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip. The switch will reboot with factory settings.
What is the maximum power consumption of the 6200F?
The maximum power consumption is 120 W under full load.
Can I stack multiple Aruba 6200F switches?
Yes, the 6200F supports virtual stacking via Aruba's VSF (Virtual Switching Framework) technology.
How do I access the web interface of the switch?
Ensure your computer is in the same subnet. Open a browser and enter the default IP address 192.168.1.1. Username: admin, password: (blank).
What types of SFP+ modules are compatible?
The switch supports standard 1GbE and 10GbE SFP+ modules that comply with IEEE 802.3ae.
How can I update the firmware?
Download the firmware from Aruba's support site. Upload it via the web interface under 'Maintenance' > 'Software Update'.
The switch fans are loud. Is this normal?
Fans speed adjust based on temperature. In a quiet environment, they may be audible. You can adjust fan policy in the CLI using fan-speed command.
What should I do if a port is not working?
Check the Ethernet cable and try a different port. Verify that the port is enabled via CLI or web. Look for link lights; if off, it may be disabled.
Can I use the switch in a dusty environment?
It is recommended to keep the switch in a clean, dust-free location. Clean air filters if present. Excessive dust can cause overheating.
How do I configure VLANs?
Access the CLI and use commands such as vlan switchport access vlan .
User questions about 6200F Aruba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual 6200F - Aruba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 6200F by Aruba.
USER MANUAL 6200F Aruba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aruba
Model : 6200F
Category : Network card