Instant On AP15 - Access Point Aruba - Free user manual and instructions
Find the device manual for free Instant On AP15 Aruba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Point |
| Brand | Aruba |
| Model | Instant On AP15 |
| Wireless Standard | IEEE 802.11ac (Wi-Fi 5) |
| Frequency Bands | Dual-band (2.4 GHz and 5 GHz) |
| Maximum Data Rate | Up to 1.2 Gbps (300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz) |
| MIMO Configuration | 2x2:2 |
| Antennas | Internal omnidirectional |
| Dimensions (W x D x H) | 160 mm x 160 mm x 30 mm (6.3 in x 6.3 in x 1.2 in) |
| Weight | 0.3 kg (0.66 lb) |
| Power Supply | 802.3af PoE or 12 V DC (adapter sold separately) |
| Power Consumption | 9.5 W (typical) |
| Mounting | Wall or ceiling mount (bracket included) |
| Ethernet Ports | 1x Gigabit Ethernet (RJ-45) with PoE-In |
| Management | Aruba Instant On mobile app or web portal |
| Security | WPA2, WPA3, 802.1X, rogue AP detection |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 5% to 93% non-condensing |
| LED Indicators | Power, LAN, status |
| Included Accessories | Mount bracket, install template, quick start guide |
| Maintenance | Clean with dry cloth; no user-serviceable parts |
Frequently Asked Questions - Instant On AP15 Aruba
What is the default IP address for the Aruba Instant On AP15?
The default IP address is assigned via DHCP. If not available, use the Aruba Instant On mobile app to discover the device on the network.
Does the Aruba Instant On AP15 support Power over Ethernet (PoE)?
Yes, the AP15 supports 802.3af PoE (Power over Ethernet). You can also use a 12V DC power adapter (sold separately).
Can I mount the AP15 on a wall?
Yes, the access point comes with a mounting bracket for wall or ceiling installation. Use the included template for proper placement.
What wireless standard does the AP15 use?
The Aruba Instant On AP15 uses IEEE 802.11ac (Wi-Fi 5) with dual-band operation (2.4 GHz and 5 GHz) and MIMO technology.
How do I reset the Aruba Instant On AP15 to factory defaults?
Use a paperclip to press and hold the reset button on the back of the device for about 10 seconds until the LED flashes.
What is the maximum number of clients supported?
The AP15 supports up to 256 simultaneous clients (128 per band in typical deployment).
Does the AP15 support VLAN tagging?
Yes, the AP15 supports 802.1Q VLAN tagging for network segmentation, configurable via the Instant On app or web interface.
How do I update the firmware on the AP15?
Firmware updates are managed through the Aruba Instant On app or cloud portal. The device automatically checks for updates and can be set to install them during off-peak hours.
Is the AP15 compatible with mesh networking?
Yes, the AP15 can be used as part of an Aruba Instant On mesh network when multiple access points are deployed, extending coverage wirelessly.
What safety certifications does the AP15 have?
The AP15 is certified for FCC, CE, IC, and UL standards. For details, refer to the regulatory compliance section in the manual.
User questions about Instant On AP15 Aruba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual Instant On AP15 - Aruba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Instant On AP15 by Aruba.
USER MANUAL Instant On AP15 Aruba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aruba
Model : Instant On AP15
Category : Access Point