M4300-48X - Network card / adapter NETGEAR - Free user manual and instructions
Find the device manual for free M4300-48X NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed 10G Ethernet switch |
| Model Number | M4300-48X |
| Ports | 48 x Gigabit Ethernet (RJ45), 4 x 10G SFP+ |
| Form Factor | 1U Rack-mountable |
| Dimensions (W x D x H) | 17.5 x 11 x 1.7 in (44.5 x 27.9 x 4.3 cm) |
| Weight | 12.5 lb (5.7 kg) |
| Power Supply | Internal, AC 100-240V, 50-60Hz |
| Maximum Power Consumption | 150W |
| Switching Capacity | 240 Gbps |
| Forwarding Rate | 178.6 Mpps |
| Layer Support | Layer 3 routing (Static, RIP, OSPF) |
| VLAN Support | Yes, up to 4096 VLANs |
| Quality of Service (QoS) | Yes, with 8 priority queues |
| Stacking Capability | Yes, up to 12 units |
| Management | Web GUI, CLI, SNMP, RMON |
| Cooling | 2 x fans (front-to-back airflow) |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity | 5% to 95% (non-condensing) |
| Safety Certifications | UL, CE, FCC, RoHS |
| Warranty | Lifetime limited warranty |
Frequently Asked Questions - M4300-48X NETGEAR
How to reset the M4300-48X to factory defaults?
Press and hold the Factory Defaults button on the front panel for 10 seconds using a paperclip. The switch will reboot with factory settings.
What is the default IP address of the M4300-48X?
The default management IP address is 192.168.0.239 with subnet mask 255.255.255.0.
How to update the firmware?
Download the firmware from NETGEAR Support. Access the web GUI, go to Maintenance > Upgrade, and upload the file. Do not power off during the update.
Can I use SFP+ modules for 10G connections?
Yes, the four SFP+ ports support 10GBASE-SR/LR or 10GBASE-CU direct attach cables. Use NETGEAR-certified modules for best compatibility.
How to configure VLANs on the M4300-48X?
Access the web GUI, go to Switching > VLAN > VLAN Configuration. Create VLANs and assign untagged/tagged ports as needed.
What is the maximum power consumption?
The maximum power consumption is 150W. Actual consumption varies with port usage and module types.
Does the switch support stacking?
Yes, the M4300-48X supports stacking of up to 12 units via dedicated stacking ports or SFP+ ports. See the manual for cabling requirements.
How to clean the switch?
Power off the switch. Use a dry, soft cloth to clean the exterior. For vents, use compressed air. Do not use liquids or solvents.
What spare parts are available?
Replaceable parts include power supply units (field-replaceable), fan modules, and SFP+ transceivers. Contact NETGEAR for authorized parts.
The switch is not powering on. What should I do?
Check the power cable and outlet. Ensure the power switch is on. If using a power supply module, verify it is securely inserted. If still off, contact NETGEAR support.
User questions about M4300-48X NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual M4300-48X - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M4300-48X by NETGEAR.
USER MANUAL M4300-48X NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : M4300-48X
Category : Network card / adapter