iCUE LINK TITAN 240 RX LCD - Ventirad CORSAIR - Free user manual and instructions
Find the device manual for free iCUE LINK TITAN 240 RX LCD CORSAIR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | All-in-One Liquid CPU Cooler |
| Radiator Size | 240 mm (2 x 120 mm fans) |
| Radiator Dimensions | 277 x 120 x 27 mm |
| Pump Block Dimensions | 60 x 60 x 55 mm |
| Weight | Approx. 1.2 kg |
| Power Connector | SATA for pump, 4-pin PWM for fans |
| Fan Speed | 400 - 2000 RPM ±10% |
| Fan Airflow | 65.6 CFM (max) |
| Fan Noise Level | 10 - 30 dBA |
| Pump Speed | 2400 - 3600 RPM |
| LCD Display | 2.1-inch IPS, 320 x 240 pixels |
| Lighting | Addressable RGB on pump and fans |
| Software Control | iCUE LINK (RGB, LCD, fan curves) |
| Socket Compatibility | Intel LGA1700/1200/115x, AMD AM5/AM4 |
| Coolant | Pre-filled, sealed loop (no refill) |
| Maintenance | Tool-free cleaning of radiator fins |
| Safety Features | Leak-proof design, low evaporation tubing |
| Spare Parts Available | Fans, mounting kits, thermal paste |
| Repairability | Modular cables, replaceable fans |
Frequently Asked Questions - iCUE LINK TITAN 240 RX LCD CORSAIR
How do I install the iCUE LINK TITAN 240 RX LCD cooler?
Install the backplate and mounting brackets for your CPU socket, apply thermal paste, secure the pump block, mount the radiator and fans, then connect all cables to the iCUE LINK system hub (included). Refer to the manual for torque specifications.
Can I customize the LCD screen display?
Yes, use iCUE software to change the LCD screen to show CPU temperature, GIFs, images, or text. You can also adjust brightness and rotation.
What should I do if the pump is making noise?
Check that the pump is not running dry (ensure proper coolant circulation) and that the pump speed is not set too high (over 3600 RPM). Air bubbles may cause temporary noise; tilt the case gently or run the pump at full speed for a few minutes.
Is the iCUE LINK TITAN 240 compatible with my Intel LGA 1700 CPU?
Yes, it includes mounting hardware for LGA 1700, as well as LGA 1200/115x and AMD AM5/AM4. Ensure you use the correct standoffs and bracket.
Do I need to refill the coolant?
No, the loop is sealed and pre-filled with non-conductive coolant. No maintenance is required. Leaking coolant indicates damage; contact support.
How do I control RGB lighting without iCUE?
The cooler can be controlled via the motherboard's 3-pin ARGB header if you connect the splitter cable. However, full customization and LCD integration require iCUE LINK.
What is the maximum thermal dissipation (TDP) supported?
This cooler can handle up to 250W TDP for sustained loads, making it suitable for high-end CPUs like Intel Core i9 or AMD Ryzen 9.
Can I replace the fans with different ones?
Yes, the radiator uses standard 120mm fan mounts. You can swap with other PWM fans, but ensure they are compatible with the iCUE LINK hub or motherboard.
How do I clean the radiator?
Use compressed air to blow dust from the radiator fins. Avoid using water or vacuum cleaners that may damage the fins. Clean the fans with a soft brush.
What does the iCUE LINK system hub do?
The hub connects all iCUE LINK devices (pump, fans, LCD) via a single cable, simplifying cable management and providing power and data for software control.
User questions about iCUE LINK TITAN 240 RX LCD CORSAIR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ventirad in PDF format for free! Find your manual iCUE LINK TITAN 240 RX LCD - CORSAIR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iCUE LINK TITAN 240 RX LCD by CORSAIR.
USER MANUAL iCUE LINK TITAN 240 RX LCD CORSAIR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CORSAIR
Model : iCUE LINK TITAN 240 RX LCD
Category : Ventirad