S2205-04 - Server MSI - Free user manual and instructions
Find the device manual for free S2205-04 MSI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server (Rackmount) |
| Model | MSI S2205-04 |
| Form Factor | 2U Rack |
| Dimensions (W x D x H) | 430 x 700 x 88 mm (16.9 x 27.6 x 3.5 in) |
| Weight | ~20 kg (44 lbs) |
| Power Supply | Dual redundant 800W (80+ Platinum) |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Processor Support | Dual Intel Xeon Scalable (Socket LGA 3647) |
| Memory | 16 DDR4 DIMM slots (up to 2TB ECC) |
| Storage | 8 x 3.5" SATA/SAS hot-swap bays |
| RAID Support | Hardware RAID 0,1,5,6,10 (optional controller) |
| Network | Dual 10GbE RJ45 + Dedicated Management Port |
| Expansion Slots | 3 x PCIe 3.0 x16 (low-profile) |
| Management | IPMI 2.0 with dedicated LAN (AST2500) |
| Cooling | 4 x hot-swap redundant fans |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Certifications | FCC, CE, UL, RoHS |
| Maintenance | Clean external air filters monthly; vacuum internal dust bi-annually |
| Safety | Discharge static before handling components; use wrist strap |
| Spare Parts & Repairability | Field-replaceable PSU, fans, HDDs, DIMMs; CPU and MB require authorized service |
| Warranty | 3 years limited hardware warranty |
Frequently Asked Questions - S2205-04 MSI
What is the form factor of the MSI S2205-04 server?
The MSI S2205-04 is a 2U rackmount server, designed for standard 19-inch racks.
How do I install the server into a rack?
Use the included rail kit and follow the manual: attach inner rails to the server, outer rails to the rack, then slide the server in. Ensure proper ventilation and secure with screws.
What CPUs are supported?
The S2205-04 supports dual Intel Xeon Scalable processors (Skylake/Cascade Lake) in LGA 3647 socket. For exact compatible models, refer to the CPU support list.
How much memory can I install?
It has 16 DDR4 DIMM slots supporting up to 2TB of ECC RDIMM/LRDIMM. Use modules listed in the memory QVL.
Can I configure RAID?
Yes, an optional hardware RAID controller can be installed in a PCIe slot. The motherboard supports software RAID on SATA ports. For hardware RAID, you need a controller like LSI MegaRAID.
How do I access the IPMI management interface?
Connect to the dedicated management port (labeled IPMI or MGMT). Default IP is 192.168.0.10/24, username admin, password admin. Change immediately for security.
What do the LED indicators mean?
Front panel LEDs: Power (green = on), HDD activity (flashing = access), Status (amber = warning/error). Refer to manual for detailed codes.
How do I replace a failed hard drive?
The drives are hot-swappable. Remove the failed drive by pressing the release lever, insert a new drive, and close the lever. The RAID will rebuild automatically if properly configured.
What do I do if the server overheats?
Check that ambient temperature is within 10-35°C, ensure front and rear ventilation is clear, and that all fans are spinning. Replace any faulty fans. Clean air filters and internal dust.
Where can I find the latest firmware updates?
Visit MSI's support website and enter model S2205-04. Download BIOS, BMC, and firmware updates from the download center. Follow the instructions in the release notes.
User questions about S2205-04 MSI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual S2205-04 - MSI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S2205-04 by MSI.