SXTsq 5 ac - Router Mikrotik - Free user manual and instructions
Find the device manual for free SXTsq 5 ac Mikrotik in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor CPE Router |
| Model | SXTsq 5 ac |
| Brand | MikroTik |
| Frequency Band | 5 GHz (5150-5875 MHz) |
| Wireless Standard | 802.11a/n/ac |
| Antenna Gain | 16 dBi |
| Polarization | Dual Linear (Vertical/Horizontal) |
| Dimensions (HxWxD) | 220 x 220 x 75 mm |
| Weight | 400 g |
| Power Supply | PoE 12-30 V DC |
| Power Consumption | 7 W (max) |
| Ethernet Ports | 1x 10/100/1000 Mbps (PoE in) |
| Operating System | RouterOS (Level 4 license) |
| CPU | QCA9557 (720 MHz) |
| RAM | 64 MB |
| Flash Storage | 16 MB |
| Wireless MIMO | 2x2 |
| Operating Temperature | -40°C to +70°C |
| Housing Material | UV-resistant plastic |
| Ingress Protection | IP54 |
| Mounting | Pole mount (included clamp) |
| Maintenance | Clean with soft, dry cloth |
| Safety | Low voltage PoE, outdoor rated |
| Spare Parts / Repairability | Not user-serviceable; contact MikroTik support |
Frequently Asked Questions - SXTsq 5 ac Mikrotik
How do I reset the MikroTik SXTsq 5 ac to factory defaults?
Press and hold the reset button (inside a small hole) while powering on the device. Keep holding for about 10 seconds until the LED starts flashing, then release. The device will reboot with factory settings.
What is the default IP address and login for the SXTsq 5 ac?
The default IP address is 192.168.88.1 on the ethernet port. Default username is admin with no password (leave blank). Access via web browser or WinBox.
Can I use the SXTsq 5 ac as a client bridge?
Yes, the device can operate as a station (client) in bridge mode. Configure in RouterOS under Wireless > Interface > Mode = station bridge, then set the SSID and security.
What is the maximum power output of the SXTsq 5 ac?
The maximum transmit power is 30 dBm (1 watt) per chain, but actual power depends on regulatory domain and local laws. Always comply with local regulations.
Does the SXTsq 5 ac support PoE passthrough?
No, this model does not have PoE passthrough. It only has one Ethernet port that accepts PoE in (12-30 V DC). Use a PoE injector or a PoE switch.
How to update the firmware on the SXTsq 5 ac?
Download the latest RouterOS firmware from MikroTik's website. In RouterOS, go to System > RouterBoard and upload the .npk file, or use the built-in update feature under System > Software.
What is the range of the SXTsq 5 ac?
The range depends on environment and antennas. With the integrated 16 dBi antenna, line-of-sight connections of up to 10-15 km are possible in ideal conditions.
Can I use the SXTsq 5 ac indoors?
While it can be used indoors, it is designed for outdoor use with IP54 rating. Indoors, ensure proper ventilation and consider aesthetics.
How to configure the SXTsq 5 ac as a WISP AP?
Set the wireless mode to ap bridge, configure an SSID, security (WPA2), and bridge the wireless and ethernet interfaces. Assign a static IP on the bridge for management.
What does the LED indicator mean?
A solid green LED indicates the device is powered on and operating. Blinking indicates activity. No light suggests power or hardware failure. Refer to the manual for detailed LED patterns.
User questions about SXTsq 5 ac Mikrotik
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual SXTsq 5 ac - Mikrotik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SXTsq 5 ac by Mikrotik.
USER MANUAL SXTsq 5 ac Mikrotik
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mikrotik
Model : SXTsq 5 ac
Category : Router