Chateau LTE6-US - Router Mikrotik - Free user manual and instructions
Find the device manual for free Chateau LTE6-US Mikrotik in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4G LTE Router with WiFi |
| Model | Chateau LTE6-US |
| Brand | MikroTik |
| Dimensions | 220 x 140 x 35 mm |
| Weight | 600 g |
| Power Supply | 24 V DC, 1.2 A (PoE in or power jack) |
| LTE Category | Cat 6 (up to 300 Mbps downlink) |
| WiFi Standard | 802.11b/g/n/ac (2.4 GHz & 5 GHz) |
| Ethernet Ports | 5 x Gigabit (1x WAN, 4x LAN) |
| SIM Card Slot | 1 (Micro SIM) |
| Antenna Connectors | 2 x SMA (external LTE antennas optional) |
| Operating System | RouterOS (Licensed L4) |
| Main Functions | 4G LTE internet, WiFi access point, router, firewall, VPN, QoS, hotspot |
| Maintenance | Keep clean and ventilated; update firmware via WebFig or WinBox |
| Safety | Use only included power adapter; avoid water and extreme temperatures |
| Spare Parts & Repairability | External antennas, power supply, SIM tray; user-serviceable with care |
| General Information | Designed for home and small office, supports up to 254 clients |
Frequently Asked Questions - Chateau LTE6-US Mikrotik
How do I initially configure the Chateau LTE6-US?
Connect to its default WiFi (SSID begins with 'MikroTik') or use an Ethernet cable to one of the LAN ports. Open a browser to 192.168.88.1 and follow the quick setup wizard in WebFig. You can also use the WinBox utility.
What SIM card size does the Chateau LTE6-US require?
It requires a standard Micro SIM (not nano or full-size). Insert the SIM into the slot located on the rear panel.
Can I use external LTE antennas with this router?
Yes, the router has two SMA connectors (female) for external LTE antennas. This can improve signal strength in weak coverage areas.
How do I update the firmware?
Go to WebFig > System > Software, check for updates directly from the internet, or download the latest RouterOS package from MikroTik's website and upload it via WebFig or WinBox.
What is the maximum LTE speed?
The LTE6 modem supports Cat 6 with carrier aggregation, providing theoretical downlink speeds up to 300 Mbps and uplink up to 50 Mbps. Actual speed depends on your carrier and signal.
Does the Chateau LTE6-US support dual-band WiFi?
Yes, it has concurrent dual-band 2.4 GHz (b/g/n) and 5 GHz (a/n/ac) WiFi with a combined maximum data rate of 1200 Mbps.
Can I use this router as a VPN client or server?
Absolutely. RouterOS supports IPsec, OpenVPN, PPTP, L2TP, SSTP, and WireGuard. Configure via WebFig or WinBox under PPP or VPN sections.
How do I reset the router to factory defaults?
Press and hold the Reset button (located near the power jack) for 5-10 seconds while powering on. Release when the LED starts blinking rapidly. The device will reboot with default settings.
What should I do if the LTE LED is not lighting up?
Check that the SIM card is correctly inserted, has an active data plan, and the router's APN settings match your carrier. Go to WebFig > Interfaces > LTE and verify status. Try power cycling.
Can I use the Chateau LTE6-US with a PoE switch?
Yes, it supports PoE in (802.3af/at) on the first Ethernet port (Port1). Alternatively, use the included 24V power adapter.
User questions about Chateau LTE6-US Mikrotik
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Chateau LTE6-US - Mikrotik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Chateau LTE6-US by Mikrotik.
USER MANUAL Chateau LTE6-US Mikrotik
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mikrotik
Model : Chateau LTE6-US
Category : Router