VS-66H2 - Router Kramer - Free user manual and instructions
Find the device manual for free VS-66H2 Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 6x6 HDMI Matrix Router |
| Video Inputs | 6 x HDMI (Type A, female) |
| Video Outputs | 6 x HDMI (Type A, female) |
| Max Resolution | 4K@60Hz (4:4:4) up to 4096x2160 |
| HDCP Support | HDCP 2.2 |
| Bandwidth | 18 Gbps (HDR support) |
| Control | RS-232, Ethernet, IR, front panel buttons |
| Power Supply | 100-240V AC, 50/60 Hz, 1.5A |
| Power Consumption | 24W typical |
| Dimensions (W x D x H) | 19" x 10.5" x 1.75" (483 x 267 x 44 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 10% to 90% RH (non-condensing) |
| Rack Mountable | Yes, 1U height |
| Maintenance | Keep dry, clean with soft cloth; no liquid cleaners |
| Safety | UL, CE, FCC compliant |
| Spare Parts | Contact Kramer support for replacement power supply and IR sensor |
| General Information | Switching of HDMI sources; HDBaseT output optional via optional transmitter |
Frequently Asked Questions - VS-66H2 Kramer
How do I reset the VS-66H2 to factory defaults?
Press and hold the Reset button on the rear panel for 5 seconds until all LEDs flash, then release. The unit will reboot with factory settings.
What is the maximum cable length for HDMI inputs?
For 4K@60Hz, use certified HDMI cables up to 5m (16ft). For 1080p, up to 15m (49ft) is possible with quality cables.
Can I control the VS-66H2 via Ethernet?
Yes, connect the Ethernet port to your network and use the built-in web server or API commands. Default IP is 192.168.1.100, subnet mask 255.255.255.0.
Does the VS-66H2 support HDCP 2.2?
Yes, all HDMI inputs and outputs support HDCP 2.2 and are backward compatible with HDCP 1.4.
How do I update the firmware?
Download the latest firmware from the Kramer website. Connect via Ethernet, access the web interface, and upload the firmware file under the System menu.
What do the LED indicators on the front panel mean?
Each input/output button has a blue LED. A solid blue indicates the selected input. The Power LED is blue when on. Flashing indicates standby or error.
Can I use the VS-66H2 with HDBaseT extenders?
Yes, the HDMI outputs can be connected to HDBaseT transmitters (e.g., Kramer TP-580) to extend signals up to 100m (330ft) over CAT6 cable.
How do I switch inputs using RS-232?
Use serial commands via a terminal program. For example, send IN1 OUT2 to route input 1 to output 2. Baud rate: 9600, data bits: 8, parity: none, stop bits: 1.
What is the default password for the web interface?
The default admin username is admin and password is admin (case-sensitive). Change it in the web interface for security.
The output is black or no signal. What should I check?
First verify the input device is powered and outputting a signal. Ensure cables are securely connected and HDCP compatibility. Try a different input port. If using EDID emulation, check settings.
User questions about VS-66H2 Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual VS-66H2 - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VS-66H2 by Kramer.
USER MANUAL VS-66H2 Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : VS-66H2
Category : Router