VS-411XS - Router Kramer - Free user manual and instructions
Find the device manual for free VS-411XS Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4x1 Composite Video & Stereo Audio Switcher / Router |
| Brand | Kramer |
| Model | VS-411XS |
| Video Inputs | 4 x RCA (composite video) |
| Video Outputs | 1 x RCA (composite video) |
| Audio Inputs | 4 x RCA (stereo audio) |
| Audio Outputs | 1 x RCA (stereo audio) |
| Control Interface | Front panel buttons, RS-232, IR remote |
| Bandwidth | 100 MHz (-3dB) |
| Audio Frequency Response | 20 Hz - 20 kHz |
| Power Supply | 12V DC / 500 mA (external adapter) |
| Dimensions (W x D x H) | 21.5 cm x 16.2 cm x 4.4 cm (half 19" rack) |
| Weight | 0.9 kg |
| Supported Video Standards | NTSC, PAL, SECAM |
| Signal to Noise Ratio | >80 dB (video) |
| Input Voltage Range | 100-240 VAC (via adapter) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance | Wipe with dry cloth; no internal user-serviceable parts |
| Safety | Use only provided power adapter; do not expose to moisture |
Frequently Asked Questions - VS-411XS Kramer
How do I connect the VS-411XS to my TV and sources?
Connect your composite video sources (e.g., DVD, camera) to the four RCA video inputs and the corresponding stereo audio inputs. Connect the output to your TV or monitor via the RCA video and audio outputs. Use the front panel buttons or IR remote to select the desired input.
Can I control the VS-411XS via computer?
Yes, the unit supports RS-232 serial control. Connect a PC using a 9-pin D-sub cable and use Kramer's control software or send ASCII commands. The default baud rate is 9600, no parity, 8 data bits, 1 stop bit.
What is the maximum cable length for video input?
For composite video, use high-quality coaxial cables up to 30 meters (100 feet) without significant signal degradation. For longer runs, consider using a distribution amplifier.
Does the VS-411XS support audio following video?
Yes, audio follows the selected video input automatically. There is no separate audio switching control.
How do I reset the unit to factory defaults?
Power off the unit. Press and hold the 'INPUT 1' button while powering on. Release the button after 3 seconds. All settings will be restored to default.
What type of power adapter does the VS-411XS use?
It uses a 12V DC power adapter with a center-positive barrel jack. The adapter must supply at least 500 mA. Use only the adapter provided by Kramer.
Can I rack-mount the VS-411XS?
Yes, it is half 19-inch rack width. You can mount one or two units side by side using optional Kramer RK-MNT rack adapter kit.
Why is there no picture on the output?
Check that the source is powered and connected properly. Ensure the correct input is selected. Verify that the output cable is connected to the monitor. Also, confirm that the power LED is lit. If using RS-232, check that the unit is not in remote lock mode.
How do I clean the VS-411XS?
Disconnect power. Gently wipe the front panel and case with a soft, dry cloth. Do not use any liquids or sprays. Avoid abrasive materials.
Is there a way to lock the front panel buttons?
Yes, press and hold the 'OUTPUT' button for 5 seconds. The front panel buttons will be locked to prevent accidental changes. Repeat to unlock. The IR remote still works when locked.
User questions about VS-411XS Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual VS-411XS - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VS-411XS by Kramer.
USER MANUAL VS-411XS Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : VS-411XS
Category : Router