CE-REL8 - Audio/video extension AMX - Free user manual and instructions
Find the device manual for free CE-REL8 AMX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Extension Relay Controller |
| Brand | AMX |
| Model | CE-REL8 |
| Category | Audio/Video Extension |
| Number of Channels | 8 |
| Power Consumption | 15 W max |
| Input Voltage | 12 V DC (power supply included) |
| Dimensions (W x D x H) | 10.5 x 6.5 x 2.2 inches (267 x 165 x 56 mm) |
| Weight | 2.5 lbs (1.13 kg) |
| Enclosure Material | Metal, black finish |
| Mounting | Rack-mountable (1U) or surface mount |
| Connections | 8 x relay terminals; 2 x RJ45 for control |
| Control Interface | AMX NetLinx, RS-232, Ethernet |
| Indicators | Power LED, status LEDs per channel |
| Supported Protocols | AMX DataPort, TCP/IP |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Compliance | CE, FCC Class A |
| Warranty | 3 years limited |
Frequently Asked Questions - CE-REL8 AMX
How do I connect the CE-REL8 to my AMX controller?
Use an RJ45 cable to connect the CE-REL8's DataPort to an AMX NetLinx controller. Ensure proper termination and power supply.
What is the maximum load per relay channel?
Each relay supports up to 30 VDC at 2 A or 250 VAC at 2 A, resistive load. For inductive loads, derate appropriately.
Can I mount the CE-REL8 in a standard rack?
Yes, it occupies 1U of rack space. Use the included rack ears for secure mounting.
How do I reset the device to factory defaults?
Press and hold the reset button on the front panel for 5 seconds until all LEDs flash. This clears all settings.
Does the CE-REL8 support PoE?
No, it requires a 12 V DC power supply. The included adapter provides adequate power.
What is the purpose of the status LEDs?
Each channel has a green LED that illuminates when the relay is energized. The power LED indicates unit is on.
Can I control the relays via third-party systems?
Yes, through serial (RS-232) or Ethernet using standard commands. Consult the protocol guide for details.
How do I update the firmware?
Download the latest firmware from AMX website. Use the AMX NetLinx Studio software to upload via Ethernet.
What cable do I use for relay output?
Use 18-24 AWG stranded wire. Strip 1/4 inch and insert into the screw terminals. Tighten to 0.5 Nm torque.
Is the CE-REL8 compatible with AMX DMS systems?
Yes, it works with DMS encoders and decoders via the DataPort or network, enabling relay control in AV distribution.
User questions about CE-REL8 AMX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video extension in PDF format for free! Find your manual CE-REL8 - AMX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CE-REL8 by AMX.
USER MANUAL CE-REL8 AMX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMX
Model : CE-REL8
Category : Audio/video extension