CE-COM2 - Audio/video extension AMX - Free user manual and instructions
Find the device manual for free CE-COM2 AMX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Extension Module |
| Brand | AMX |
| Model | CE-COM2 |
| Dimensions (H x W x D) | 1.2 x 4.2 x 3.5 inches |
| Weight | 0.5 lbs |
| Power Supply | 12V DC, 500mA |
| Power Consumption | 6W maximum |
| Connector Type | RJ-45, Phoenix screw terminals |
| Supported Protocols | RS-232, IR, Relays, I/O |
| Signal Extension | Up to 1000 ft (300 m) via Cat5 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 5% to 90% non-condensing |
| Mounting | Desktop or wall-mountable |
| Front Panel LEDs | Power, Link, Data |
| Firmware Upgrade | Via USB or network |
| Compatibility | AMX NetLinx control systems |
| Max Supported Resolution | 1920x1080 @ 60Hz |
| Audio Format Support | Stereo analog, PCM digital |
| Warranty | 2 years limited |
| Included Accessories | Power adapter, mounting brackets, manual |
Frequently Asked Questions - CE-COM2 AMX
What is the CE-COM2 used for?
The CE-COM2 is an audio/video extension module that extends control signals (RS-232, IR, relays) and video over long distances using Cat5 cable.
What is the maximum cable length?
The maximum cable length for reliable signal extension is 1000 feet (300 meters) using Cat5 or better cable.
Does it support HDMI?
No, the CE-COM2 does not support HDMI directly. It supports analog video (composite or component) and audio signals. For HDMI, use an AMX HDMI extender.
How do I power the device?
The device requires a 12V DC power supply (500mA minimum). Connect the included power adapter to the DC jack.
Can I control the device via IR?
Yes, the CE-COM2 can receive and transmit IR signals for remote control of source devices. It has an IR input and output port.
What is the LED indication?
The front panel has three LED indicators: Power (green when on), Link (yellow when link established), and Data (flashes on activity).
Is it compatible with non-AMX systems?
The CE-COM2 is designed for AMX NetLinx control systems. It may work with other RS-232 or IR systems but compatibility is not guaranteed.
How do I reset the device?
To reset the CE-COM2, press and hold the reset button on the side for 5 seconds using a paperclip. This restores factory defaults.
Can it be mounted on a wall?
Yes, the CE-COM2 has keyhole slots for wall mounting. Use the included brackets and appropriate screws.
What maintenance is required?
The device is maintenance-free. Keep it dry and dust-free. Clean with a soft dry cloth. Do not use liquids or sprays.
User questions about CE-COM2 AMX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video extension in PDF format for free! Find your manual CE-COM2 - AMX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CE-COM2 by AMX.
USER MANUAL CE-COM2 AMX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMX
Model : CE-COM2
Category : Audio/video extension