12-KPO-10 - Air Conditioning MPM - Free user manual and instructions
Find the device manual for free 12-KPO-10 MPM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | MPM |
| Model | 12-KPO-10 |
| Cooling Capacity (BTU) | 12,000 BTU/hr |
| Cooling Capacity (kW) | 3.5 kW |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption (Cooling) | 1.2 kW |
| Current | 5.5 A |
| Refrigerant | R-410A |
| Dimensions (W x D x H) | 460 x 380 x 740 mm |
| Weight | 28 kg |
| Noise Level (Low/High) | 52 / 56 dB(A) |
| Airflow Rate | 420 m³/h |
| Dehumidification Capacity | 1.5 L/h |
| Functions | Cooling, Dehumidifying, Fan, Auto Mode, Sleep Mode, Timer, Remote Control |
| Remote Control | Yes (included) |
| Filter Type | Washable mesh filter |
| Maintenance | Clean filter every 2 weeks; drain condensate regularly |
| Safety Features | Overload protection, auto shut-off when full, tip-over protection |
| Installation | Window kit included for exhaust hose |
| Spare Parts Available | Remote control, filter, exhaust hose, window kit |
| Repairability Index | 7.5/10 (estimated) |
| Warranty | 2 years (subject to conditions) |
Frequently Asked Questions - 12-KPO-10 MPM
How do I install the MPM 12-KPO-10 air conditioner?
Installation is straightforward: attach the exhaust hose to the unit, extend the window kit to fit your window, and seal the gap. Ensure the unit is level and the hose is not kinked. Refer to the manual for detailed steps.
How often should I clean the filter?
The filter should be cleaned every 2 weeks under normal use. Simply remove it, wash with warm water and mild detergent, dry completely, and reinstall.
Why is the unit not cooling properly?
Check if the filter is dirty, the exhaust hose is blocked, the room is too large, or the set temperature is too high. Also ensure windows and doors are closed.
How do I drain the condensate?
The unit has a continuous drain option; connect a hose (not included) to the drain outlet and route it to a floor drain. Alternatively, the internal tank can be emptied manually when full.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose must be vented outside to remove hot air. Using it without will reduce efficiency and may cause overheating.
What does the error code E1 mean?
Error E1 usually indicates a sensor issue. Turn off the unit, wait 10 minutes, and restart. If the error persists, contact customer support.
Is the remote control included?
Yes, a remote control is included with the unit. It requires two AAA batteries (not included).
What is the recommended room size for this unit?
The MPM 12-KPO-10 is designed for rooms up to 30-35 m² (approx. 320-375 sq ft).
How do I set the timer?
Press the Timer button on the remote or control panel. Use the + or - buttons to set the desired on/off time. Press Timer again to confirm.
Why is the unit making a loud noise?
Check if the unit is on a level surface. If the noise persists, the compressor may be operating normally, or loose parts may need tightening. Contact support if abnormal.
User questions about 12-KPO-10 MPM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual 12-KPO-10 - MPM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 12-KPO-10 by MPM.
USER MANUAL 12-KPO-10 MPM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MPM
Model : 12-KPO-10
Category : Air Conditioning