HDS2062M-N - Multimeter Owon - Free user manual and instructions
Find the device manual for free HDS2062M-N Owon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Digital Oscilloscope Multimeter |
| Display | 3.5-inch TFT LCD with 320x240 resolution |
| Bandwidth | 60 MHz |
| Sample Rate | 250 MS/s (real-time) |
| Channels | 2 |
| Input Impedance | 1 MΩ ± 2% |
| Max Input Voltage | CAT II 300 V |
| DC Voltage Range | 400 mV to 1000 V |
| DC Voltage Accuracy | ±(0.5% + 5 digits) |
| Resistance Range | 400 Ω to 40 MΩ |
| Capacitance Range | 4 nF to 40 mF |
| Frequency Range | 10 Hz to 60 MHz |
| Continuity Test | Audible beep < 50 Ω |
| Diode Test | Yes |
| Power Supply | Rechargeable Li-ion battery 4000 mAh |
| Battery Life | Approximately 4 hours of continuous use |
| Dimensions | 196 x 106 x 58 mm |
| Weight | Approximately 540 g |
| Safety Rating | CAT II 300 V, EN 61010 |
| Maintenance | Clean with dry cloth; no user-serviceable parts inside |
| Spare Parts Availability | Replacement test leads and probes available from Owon |
Frequently Asked Questions - HDS2062M-N Owon
What is the maximum voltage the Owon HDS2062M-N can measure?
The HDS2062M-N can measure DC voltage up to 1000 V and AC voltage up to 750 V (CAT II 300 V). Always check the manual for safety limits.
How do I charge the battery?
Use the supplied USB cable and a standard 5V USB charger. Connect to the charging port on the device. The battery indicator will show charging status.
Can I use the oscilloscope and multimeter simultaneously?
Yes, the HDS2062M-N allows simultaneous operation of the oscilloscope and multimeter functions, displayed on the same screen.
How to perform a continuity test?
Set the rotary switch to the continuity/diode position. Connect the test leads. A continuous beep indicates a closed circuit (< 50 Ω).
What is the real-time sample rate?
The real-time sample rate is 250 MS/s per channel, sufficient for capturing fast signals up to 60 MHz bandwidth.
Does it come with probe compensation?
Yes, the device includes a built-in 1 kHz square wave output for probe compensation adjustments.
How do I update the firmware?
Download the latest firmware from Owon's official website. Transfer the file to a microSD card, insert into the device, and follow the update procedure in the manual.
What accessories are included?
The package includes two oscilloscope probes, a pair of multimeter test leads, a USB charging cable, a microSD card, and a carrying case.
Can I measure current?
Yes, the HDS2062M-N can measure AC/DC current up to 10 A using the multimeter mode. Use the appropriate input jacks.
How to reset the device?
Press and hold the power button for 10 seconds to force reset. Alternatively, remove the battery if accessible. Refer to the manual for details.
User questions about HDS2062M-N Owon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual HDS2062M-N - Owon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDS2062M-N by Owon.
USER MANUAL HDS2062M-N Owon
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Owon
Model : HDS2062M-N
Category : Multimeter