XDM1141 - Multimeter Owon - Free user manual and instructions
Find the device manual for free XDM1141 Owon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Owon |
| Model | XDM1141 |
| Dimensions | 200 mm x 100 mm x 50 mm |
| Weight | Approximately 400 g |
| Power Supply | 2 x 1.5V AA Batteries |
| Display | 4.5 digit LCD with backlight |
| DC Voltage Range | 600 mV to 1000 V |
| AC Voltage Range | 600 mV to 750 V |
| DC Current Range | 600 µA to 10 A |
| AC Current Range | 600 µA to 10 A |
| Resistance Range | 600 Ω to 60 MΩ |
| Capacitance Range | 60 nF to 60 mF |
| Frequency Range | 60 Hz to 60 MHz |
| Temperature Measurement | -40°C to 1000°C (with K-type thermocouple) |
| Safety Rating | CAT III 1000V, CAT IV 600V |
| Functions | Auto-ranging, data hold, relative mode, diode test, continuity buzzer |
| Accessories Included | Test leads, thermocouple, carrying case, manual |
| Maintenance and Cleaning | Wipe with dry cloth; avoid solvents; replace fuses as needed |
| Repairability and Spare Parts | Fuses and test leads available; refer to manual for service |
Frequently Asked Questions - XDM1141 Owon
How do I measure AC voltage with the XDM1141?
Set the rotary switch to the AC voltage range (V~). Insert the black lead into the COM jack and the red lead into the VΩ jack. Touch the probes to the circuit and read the display.
What is the maximum current I can measure?
The XDM1141 can measure up to 10A AC/DC. For currents above 600mA, use the 10A input jack (red) and set the range accordingly.
How do I replace the battery?
Turn off the meter and disconnect the test leads. Open the battery compartment at the back, replace the two AA batteries, and close the cover securely.
What does the continuity buzzer indicate?
The continuity function tests if a circuit is complete. If the resistance is below approximately 50Ω, the meter will emit a continuous beep.
Can I measure temperature with this multimeter?
Yes, the XDM1141 supports temperature measurement with a K-type thermocouple (included). Set the dial to °C/°F and connect the thermocouple.
How do I use the data hold function?
Press the 'HOLD' button to freeze the current reading on the display. Press again to release the hold. This is useful for capturing readings in dim light or tight spaces.
What safety precautions should I take?
Always observe the safety ratings (CAT III 1000V). Use proper test leads, do not measure voltages exceeding the rated limits, and inspect the meter for damage before use.
How do I measure capacitance?
Set the rotary switch to the capacitance mode (symbol -|(-). Discharge the capacitor first. Connect the leads to the capacitor terminals (COM negative, VΩ positive). Read the value.
What is the auto-ranging feature?
Auto-ranging automatically selects the correct measurement range for the input signal. If manual range is needed, press the 'RANGE' button to cycle through ranges.
Where can I download the user manual?
The user manual is available for free download from notice-facile.com in PDF format. Search for 'Owon XDM1141' to find the manual.
User questions about XDM1141 Owon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual XDM1141 - Owon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XDM1141 by Owon.
USER MANUAL XDM1141 Owon
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Owon
Model : XDM1141
Category : Multimeter