WIRELESS NOTEBOOK OPTICAL MOUSE 4000 - Souris sans fil MICROSOFT - Free user manual and instructions
Find the device manual for free WIRELESS NOTEBOOK OPTICAL MOUSE 4000 MICROSOFT in PDF.
Download the instructions for your Souris sans fil in PDF format for free! Find your manual WIRELESS NOTEBOOK OPTICAL MOUSE 4000 - MICROSOFT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WIRELESS NOTEBOOK OPTICAL MOUSE 4000 by MICROSOFT.
USER MANUAL WIRELESS NOTEBOOK OPTICAL MOUSE 4000 MICROSOFT
International Technical Support Numbers (Partial
0608 PartNo. X12-16912-06 1
XI21691206mntindb 1 & sasnoo 178 PM Microsoft Microsoft Product Guide
Read this guide for important safety and health information and the terms of the Limited Warranty that apply to the Microsoft® device that you have purchased Warning Fallure to proper set up, use, and care for this product can increase the risk of serious injury er death, or damage to the device or devices. Read this guide and keep all printed guides for future reference. For replacement guides, go to www microsoft. com/hardware or refer to the Microsoft Help and Support section for contact information. This document includes important information about many Microsoft products. Refer to sections that apply to the features of your device: À important Safety Information ‘AC-Powered Devices Battery-Powered Devices Headset Devices Webcam Devices Wireless Devices Keyboard and Mouse Devices Devices with Laser Pointers A Devices Laser and LED Specifications Regulatory Information Radio Frequency Technical Specifications Radio and TV Interference Regulations Disposal of Waste Batteries and Electrical and Electronic Equipment Statement of Compliance with EU Directives Patent Information Customer Support Options Limited Warranty À ris symbol iden product manuals.
s safety and health messages in this Product Guide and other
À Important Safety Information AC-Powered Devices These précautions apply to all products that plug into a standard wall power outlet.
Failure to take the following precautions can result in serious injury or death from electric shock or fire or in damage to the device.
xH2tatématinds 2 & sean rise
‘To select an appropriate power source for your devic
+ Use onlythe power supply unit and AC power cord that came with your device or that you received from an authorized repair center.
+ Confirm that your electrical outlet provides the type of power indicated on the power supply unit {in terms of voltage [V] and frequency [Hz]. If you are not sure of the type of power supplied to your home, consult a qualified electrician.
+ Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet.
+_ Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [AI) draw by the device (indicated on the power supply unit) and any other devices that are on the same circuit
‘To avoid damaging the power cords and power supply:
+ Protect the power cords from being walked on
+ Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device.
+ Do not jerk, knot, sharply bend, or otherwise abuse the power cords. + Do not expose the power cord to sources of heat.
+ Keep children and pets away from the power cords. D not allow them to bite or chew on them. + When disconnecting the power cords, pull on the plug—de not pull on the cord
If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug your device during lightning storms or when unused for long periods of time.
For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions: 1 Plug the AC power cord into the power supply until it stops. 2. Plug the other end of the AC power cord into the wall outlet Battery-Powered Devices These precautions apply to all products that use rechargeable or disposable batteries. Improper use of batteries may result in battery fluid leakage, overheating, or explosion. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed To reduce the risk of injury: +_ Keep batteries out of reach of children. + Do not heat, open, puncture, mutilate, or dispose of batteries in fire. + Do not mix new and old batteries ar batteries of different types (for example, carbon-zinc and alkaline batteries).
+ De not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns.
xH2Gtatématinds 3 & sean rise
Remove the batteries if they are worn out or before storing your device for an extended period of time.
Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Disposal Regulations.
+ _ fa battery leaks, remove all batteries, taking care to keep the leaked fluid from touching your skin or clothes. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with à damp paper towel, or follow the battery manufacturers recommendations for cleanup.
Disposable (non-rechargeable) batteries only:
+ Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (alkaline, zinc-carbon, or zinc-chloride) of batteries.
Rechargeable batteries only:
+ Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the same type and rating as the batteries provided
+ Charge only with the recharger provided with the product Lithium button cell batteries only: +_ Perchlorate Material — special handling may apply. See: www dtsc.ca.gov/hazardouswaste/perchlorate Headset Devices Extended exposure to high volumes when using a headset may result in temporary or permanent hearing loss. To prevent damage to your headset, avoid sitting or stepping on the headset, its cable, or the cable connector Webcam Devices Webcam with magnetic and adhesive mounting After the adhesive attachment disc has been applied to the mounting surface, removing it may damage the cosmetic coating and/or leave an adhesive residue Applying the attachment disc next to or directly to a CRT-based display screen may cause permanent visual distortion of the displayed image near the area mounted Wireless Devices Before boarding any aircraft or packing a wireless device in luggage that will be checked, remove the batteries from the wireless device or turn the wireless device off (fit es an on/off switch). Wireless devices can transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are installed and the wireless device is turned on (if it has an on/off switch)
xH2tanématinds 4 & sean rise
Keyboard and Mouse Devices Health Warning Use of a keyboard or mouse may be linked to serious injuries or disorders. When using à computer, as with many activities, you may experience accasional discomfort in yeur hands, arms, shoufders, neck, or other parts of your body, However, if Yu experience symptoms such as persistent or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning sensation, or stifiness, DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY SEE A QUALIFIED HEALTH PROFESSIONAL, even if symptoms ocur when you are not werking at your computer. Symptoms like these can be associated with painful and sometimes permanently disabling injuries or disorders ofthe nerves, muscles, tendons, or other parts of the body. These musculoskeletal disorders (MSDS) include carpal tunnel syndrome, tendonitis, tenosynovits, and other conditions. While researchers are net yet able to answer many questions about MSDs, there is general agreement that many factors may be linked to their occurrence, including: overall health, stress and how ane capes with it, medical and physical conditions, and how à person positions and uses his or her body during work and other activities (including use of a keyboard or mouse). The amount of time a person performs an activity may also be a factor. Some guidelines that may help you work more comfortably with your computer and possibly reduce your risk of experiencing an MSD can be found in the “Healthy Computing Guide” installed with this devices software. this device did not come with software, you can access the “Healthy Computing Guide” at ww.microsoft.com/hardware or [in the United States anly) by calling (800) 360-7561 to request à CD at no charge. I you have questions abaut how your ou lifestyle, activities, or medical, or physical condition may be related to MSDS, see a qualfied health professional
Devices with Laser Pointers Caution Use of controls er adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. + Do not stare into beam.
Do not shine à laser pointer at anyone. Laser pointers are designed to iluminate inanimate objects.
Do not allow miners te use a painter unsupervised. Laser painters are not toys.
De not point a laser pointer at a mirrar-like (reflective) surface. À reflected beam can act like à direct
+ Do not disassemble the device.
+ De not use the device outside of its specified operating temperature range +419F (+59) to +959F (35°C). the device is exposed to an environment outside of its prescribed operation, turn off
the device and allow the temperature to stabilize within the specified operating range before using
xH2tatématind 5 & sean rise
All Devices Do Not Attempt Repairs Do not attempt ta take apart, open, service, or modify the hardware device or power supply. Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify the device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty. Choking Hazard This device may contain small parts which may be a choking hazard to children under 3. Keep small parts away from children Usage and Cleaning Use in accordance with these instructions: + Do not use near any heat sources + Only use attachments/accessories specified by Microsoft. + Clean only with dry cloth Keeping Cables Out of the Way of People and Pets ‘Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. When the product is not in use, you may need to disconnect all cables and cords from the front and rear of the product to keep them out of the reach of children and pets. Do not allow children to play with cables and cords.
& Laser and LED Specifications
Caution Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Laser Devices This device complies with International Standard 1EC60825-1:1993 +A1+A2 (IEC 60825 -1:2001-08) for a Class and Class 2 laser product. This device also complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Class 1 Laser Devices
Beam description: Collimated (parallel) beam of infrared light CLASSI {invisible to the user) LASER PRODUCT Laser power output: < 716 microwatts (at 832 nanometers) to 1EC 60825-1:2001-08 834 microwetts (at 865 nanometers)
Emitted laser avelength: nominal 850 nanometers,
range: (832 - 865 nanometers)
AA Class L laser product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1 and 21 CFR 1040.10. However, it is recommended that you not direct the laser beam (which is emitted from the bottom of the device) at anyone eyes
xH2tatématinds 6 & sean rise
Class 2 Laser Devices
GER RADIATION Beam description: Collimated (parallel) beam of light Laser power output: < 1 milliwatt Emitted laser wavelength: 630 - 670 nanometers
This optical device has no serviceable parts. The Class 2 laser beam is emitted from the front of the device.
Optical (LED) Mouse This product has been evaluated to comply with International Standard 1EC60825-1:1993+A1+A2 (IEC 60825-1:2001-08)
This product uses LEDS that are considered Class 1 (IEC60825-1:1993+A1+A2). LED output power: < 67.8uW (photochemical limit), < 4.2mW (thermal limit) LED nominal wavelength: 470nm (blue), 635nm (red)
A Class 1 product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1. However, it is recommended that you not direct the light (which is emitted from the bottom of the device) at anyone eyes.
This optical device has no serviceable parts.
Regulatory Information
Tested to comply with FCC (US. Federal Communications Commission) Standards. For home er office use. expressiy approved by Microsoft could veid the users authority to operate this device. This product is for use with NRTL-Listed (UL, CSA, ETL, etc. and/or IEC/EN 60950 compliant (CE marked) Information Technalogy equipment. No serviceable parts included.
This device is rated as à commercial product for operation at +410F (+5C) to +95°F (+35°C)
This Class 8 digital apparatus complies with Part 15 of the US. Federal Communications Commission {ECC rules, Canadian ICES-003, RSS-Gen, RSS-210, and RSS-310. Operation is subject to the fallowing two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Complies with Complies with IDA Standards IDA Standards D8102868 DB100398
xi2tatématinds 7 & sean rise
Radio Frequency Technical Specifications
27 MHz Devices Radio frequency (RF) output power: < 54 dBuV/m at 3 m Keyboard with two channels — RF frequencies: 27.095 MHz (channel 1), 27.195 MHz (channel 2) Keyboard with a single channel - RF frequency: 27.195 MHz or 27.095 MHz Mouse with two channels — RF frequencies: 27.045 MHz (channel 1), 27.145 MHz (channel 2) Mouse with a single channel - RF frequency: 27.145 MHz or 27.045 MHz Bluetooth Devices RF output power: meets Bluetooth® requirements Frequency: 2,400 MHz to 2483.5 MHz
2.4 GHz Devices Non-specific short range device RF output power: Meets all SRD requirements Frequency: within the range of 2,400 MHz to 2,483.5 MHz
and TV Interference Regulations
The Microsoft hardare devices) can radiate RF energy. not installed and used in strict accordance with
the instructions given in the printed documentation and/or on-screen Help files, the device my cause
harmful interference with other radio communications devices (for example AM/FM radios, televisions,
baby monitors, cordless phones, etc). There is, however, no guarantee that RF interference wil| not occur in
2 particular installation
To determine if yeur hardware device is causing interference to other radio-communications devices,
disconnect the device fram your computer or remove the devices batteries (for a battery operated device)
Ifthe interference stops, it was probably caused by the device. I the interference continues after you
disconnect the hardware device or remove the batteries, turn the computer off and then on again. Ifthe
interference stopped when the computer was off, check to see if one of the input/output (/0) devices or one
of the computers internal accessory boards is causing the problem. Disconnect the 1/O devices one at a time
and see ifthe interference stops.
I this hardware device does cause interference, try the following measures to correct it
+ Relocate the antenna of the other radio-communications device (for example AM/FM radios, televisions, baby monitors, cardless phones, etc until the interference stops
+ Move the hardware device farther away from the radio or TV, ar move it to one side or the other of the radio or TV.
+_ Plug the computer into a different power outlet so that the harduare device and radio or TV are on different circuits controlled by different circuit breakers or fuses
I necessary, ask your computer dealer or an experienced radio-TV technician for more suggestions.
For mare information about interference issues, go to the FCC Web site at:
http://www fcc.gov/cob/consumerfacts/interference htm
You can also cal the FCC at 888-CALL FCC to request Interference and Telephone Interference
For Bluetooth and 2.4 GHz devices only: To comply with FCC RF exposure requirements, the following operating configurations must be satisfied: the antenna has been installed by the manufacturer and no changes can be made. The wireless devices must not be co-located or operating in conjunction with any other antenna or transmitter. Except for headset and handheld devices, wireless devices must be at least 20 em between the antenna of wireless device and all persons.
For 802.11 devices only: This product is restricted to indoor use only to reduce any potential for harmful interference with licensed operation in the 5.15 to 5.25 GHz frequency range.
Microsoft Corporation: One Microsoft Way; Redmond, WA 98052-6399; U.S.A.
United States: (800) 426-9400, Canada: (800) 933-4750
Disposal of Waste Batteries and Electrical & Electronic Equipment Y
‘This symbol on the product orits batteries or its packaging means that this product and any batteries it contains must not be disposed of with your househald waste. Instead, it is your responsibility to hand this over to an applicable collection paint for the recycling of batteries and electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to
the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. For more information about where to drop off your batteries and electrical and electronic waste, please contact your local city/municipality office, your household waste disposal service, or the shop where you purchased this product. Contact weee@microsoft.com for additional information on WEEE and waste batteries.
Statement of Compliance with EU Directives
Hereby, Microsoft Corporation declares that this product is in compliance with the essential requirements and other relevant provisions of Directives, 2006/95/EC, 2004/108/EC and 1999/5/EC.
‘The technical documentation as required by the Conformity Assessment procedure is kept at the following
address: Company, Microsoft Ireland Operations Ltd. Address: Atrium Building Block 8 Carmenhall Road, Sandyford Industrial Estate, DUBLIN 18 Country: Ireland Telephone number: +353 1 295 3826 Fax number: +353 1 706 4110 Internet: hitp:/Amww.microsoft com/ireland/
United States and/or international patents pending
xH2tatématinds 9 & sean rise
Customer Support Options I you have a question about your Microsoft hardware product, do the following
+ Check the system requirements for your product (located on the packaging) to ensure that your system is compatible.
Read through all printed documentation.
For additional product information, go to the Microsoft Hardware Web site at www.microsof.com/hardware
+ For up-to-date help about using or troubleshooting your device, o to the Microsoft Help and Support Web site at htp//support microsoft com
If you still have a question, see the following Microsoft support options. Product Name: [
rosoft Hardware Devices
OEM Distributed: this product came with a new computer or device, the hardurare manufacturer provides technical support. Please contact your manufacturer directly for support
Seif-Help Support: Search our Knowledge Base, watch videos for soing common problems, and download available updates by visting http-/suppart microsoft com
Chat immediately, or send an e-mail message to a Microsoft Support Professional by
vsting http:/support microsoft com
Note that e-mail response may be delayed by several hours.
Phone Support: In the United States, call (866) 833-7088
In Canada, call (800) 876-8533
For al other regions, see the ‘International Technical Support Numbers”
later in this section.
In the United States, call (800) 892-5234
In Canada, call (866) 857-9850
For al other regions, see the ‘International Technical Support Numbers”
later in this documentation.
Conditions: Microsoft support services are subject to then-current prices, terms, and conditions, which are subject to change without notice. Toll charges may apply to all non-toll-free numbers listed.
Note For regional support policy details and more, go to http://support microsoft.com/international.aspx and select your country or region from the list. Ifthere is no Microsoft subsidiary office in your country or region, please contact the establishment from which you obtained your Microsoft product.
XH2GO12téma nd 10 & sean rise
IMPORTANT—PLEASE READ THIS LIMITED WARRANTY CAREFULLY TO UNDERSTAND YOUR RIGHTS AND OBLIGATIONS! “The term “Hardware Device” means the Microsoft hardware product, The term “You” means either an individual or a single legal entity who will be referred to in this Limited Warranty as “You” and “Your”.
A WARRANTIES LEupres Van Subject oh terms and conditions of Limite Maman ann amy ter any rest Maranties, Microsoft warrant hat under normal ie and service, on he date of acquisition as sh on Your receip or aimir prof of payment andre net 20 day fre SOFTWARE an pari time state below fort applicable Harduate Device (hareafter each defined as the “Warranty Period") that the SOFTWARE and Hardiiare Device wii substantialy conform with {he accomparying Microsoft packaging and documentation. As to any defects discovered after he Waranty Period here no arranty or condition of any kind,
For ll ether Microsoft webcams (exluding the Microsoft Xbox Live Vision Camera: Three (3) years
For ll ether Microsoft keyboard and mouse desktop set: Three (3) years
For ll other Microsoft keyboard devices: Three (3) years
For ll ether Microsoft mouse devices: Three (3) years
This Limited Warranty does not cover, and no warranty a any kind is provided with respect to any subjective r aesthetie épect ofthe Hardiare Device or SOFTWARE. The expres Warranty Hate aboue k he only express aranty made to You And provided in leu of al ather express orimplied warrants and conditions (except for any non -discaimabl impled Marais that exe), including anÿ created by any other documentation or packaging. No information or suggestions {ral ain a record) given by Microsoft agents, afflates or suppirs or or hair empleyees ar agents shall create a warranty ür condition ar expand the cape of th Limited irrantÿ fe“ Governing Lau, Excuse Forum” provision of Par 2 the Agreement applis Lo this Limited Warranty and is Incorporated! herein by reference.
2. Limitation on Duration of pied Warrantis. 1 You ar a consumer, You may also have an implied warranty and/or ondition under the law of some juridictions, which is hereby limited to the duration of the Warranty Period. Some Jrischitions do not low imitations on hou eng an imp Warranty or condition last, s0 the Foregoing imitation may not pely to You
8. EXCLUSIVE REMEDY. Subject t applicable law and the following, and provided that You return the SOFTWARE and Harduare Device to Your place of acquisition (or hat place wi not ac£ept the return, to Microsoft with a copy of Your recaiptor other bona ide proof af payment during the Warranty Period, Microsoft wi, at option and as You exclusive remedy fr breach of this Limited Warranty and an implied warrants
XH6O1atémaind 11 & sean rise
repair or replace al or part of the defective SOFTWARE or the defective Hardware Device: or make payment to You for the allowable damages that You incurred in reasonable reliance, but only up ta the amount You paid (if any) for the SOFTWARE and/or the Hardware Device less reasonable depreciation based on actual use.
‘The above remedy is subject to the following;
Any repaired or replaced SOFTWARE or Hardware Device will be new or refurbished or serviceably used, comparable in function and performance to the original Hardware Device (or SOFTWARE), and may include third party items,
‘Any SOFTWARE or Hardware Device repaired or replaced under this Limited Warranty wil be warranted for the remainder fe ariginal Warranty Period or 30 days from the date of shipment of the item back to You, vihicheer is longer. an upgrade to SOFTWARE is delivered with a new limited warranty, then the terms of that new limited warranty wi apply only a the SOFTWARE as upgraded, but will not apply to the original Hardware Device
Except as otherwise required by legislation in Your jurisdictian, costs assaciated with transport (including packaging) for warranty service shall be at Your expense; and
Microsoft does not provide any warranties regarding any other services provided under this Limited Warranty and disclaims all duties (if any) of workmanlike effort or of lack of negligence regarding such services.
€. EXCLUSION OF OTHER DAMAGES. TO THE FULL EXTENT ALLOWED BY LAW, MICROSOFT AND ITS SUPPLIERS, AFFILIATES AND AGENTS ARE NOT LIABLE FOR ANV.
Some juridictions do not allow the exclusion or limitation of incidental or consequential damages, sa the above limitation or exclusions many not apply to You.
D. EXCLUSIONS FROM COVERAGE, This Limited Warranty shal not apply and Microsoft has no liability under this Limited Warranty ifthe SOFTWARE or Harduare Device
= is used for commercial purposes including rental or lease) or purposes beyond the scope of the SOFTWARE license;
Lis modified or tampered with;
- is damaged by Acts of God, power surge, misuse, abuse, negligence, accident, wear and tear, mishanding, misapplication, er other causes unrelated to defects in the Hardware Device or the SOFTWARE:
- is damaged by programs, data, viruses, or files, or during shipments or transmissions
Lis not used in accordance with the accompanying documentation and use instructions; or
Lis repaired, modified or altered by other than a Microsoft authorized repair center and the unauthorized center causes or contributes to any defect or damage.
‘This Limited Warranty does not include any warranty regarding legal rights or abilities, such as any warranty regarding title, quiet enjoyment or lack of infringement.
XH2Oatématnds 12 & sean rise
E. REGISTRATION. You need not register Your acquisition of the SOFTWARE and Hardware Device for the Limited Warranty a be effective.
F. BENEFICIARY. To the extent allowed by applicable law, the Limited Warranty is only made to You, the first licensed user ofthe SOFTWARE or purchaser of the Hardware Device, and there are no third party beneficiaries of the Limited Warranty. Except as required by law, this Limited Warranty is not intended for and does not apply to anyone else, including anyone to whom You make any transfer as authorized in the Agreement.
G. FURTHER INFORMATION. Microsoft is the warrantor under this Limited Warranty. To receive instructions for obtaining performance of this Limited Warranty You must either contact the Microsoft subsidiary serving Your country, or write ta: Microsoft Sales Information Center, One Microsoft Way, Redmond, WA 98052-6399, USA, or visit Microsoft on the Worid Wide Web at htip/www microsoft com.
LL Submit proof of payment in the form of a bona ide, dated receipt, or invoice {or a copy) evidencing that You are the beneficiary of this Limited Warranty and that Your request for a remed} is made within the Warranty Period!
2. Follow Microsoft’ shipping and other instructions if it determines that al or part of Your Hardware Device or SOFTWARE requires return. To obtain the Limited Warranty performance, You must take or deliver the item in either ts original packaging or packaging that provides an equal degree of protection to the location specified by Microsoft. Except as otherwise required by legislation in Your jurisdiction, costs associated with transport (including packaging) for warranty service shall be at Your expense.
3. Delete or remove any iles or data You consider private or confidential prior to sending the item to Microsoft
Fallure to follow the above instructions may result in delays, cause You to incur additional charges, or may void Your Marranty.
‘This Limited Warranty gives Vou specific legal rights and You may also have other rights which vary from juridiction ta urisdiction. Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but the remainder ofthe Limited Warranty shal remain in ful force and effect ifits allocation of risks is not materially disturbed.
Information in this document, including URL and other Internet Web ste references, I subject to change without notice Unless otherwise noted, the example companies, organizations, products, domain names, e-mal addresses, logos, people, places, and events ‘epicted herein are fictitious, and no association with any real company, organization, product, domain rare, e-mal address, lOgo, person, place or vent is intended ar should be inferred. Complying with al applicable copyright laws s the responsibility of the user. Without imiting the rights under copyright, no part of this document may be reproduced, staredin or Introduced ina a retreval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, ar otherwise), or fo any purpose, without he express rtten permission of Microsoft Corporation.
Microsoft may have patents, patent applications, trademarks, copyright, or other intellectual property rights covering subject matter in this document. Except as expressy provided in any written license agreement from Microsoft, the furishing of this document does not give you any license to these patents, trademarks, copyrights, or other intllectua property
Microsoft Corporation grants the purchaser of this product the right t repraduce one (1) copy of this user manual for each Hardware Device you purchased in the package.
(© 2008 Microsoft Corporation. Al rights reserved
Microsoft Intell£ye, InteliMouse, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Allother trademarks are property of their respective owners.
XH2Oatématinds 13 & sean rise
Emissions leser : < 1 Miliwatt
International Technical Support Numbers (Partial
Atenciôn al Cliente, Activacién de producto y Soporte Técnico: 0-800-999-4617
Soporte Téenico (Tell: (54) (11) 4316-4664 Australia
Technical Support (Australian Callers Only): 13 20 58 Technical Support (International Calers) +61 2 9870 2200
Technical Support (Fax: +61 2 9870 2466
Personal Support Phane (Tel)
Osaka: (81) (6) 6347-4400
Customer Service Center (Toll}: 1577-9700 (Domestic) 82-2-567-7881 (International)
Technical Support Phone: 0860225567 (inside South Africa) (Shared call}
Technical Support Phone (Toll: +90 212 33 66 999 {oll) (212) 4446787 (Inside Turkey only)
ManualGo.com