HMC8012 - Multimeter Rohde & Schwarz - Free user manual and instructions
Find the device manual for free HMC8012 Rohde & Schwarz in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bench Digital Multimeter |
| Display | 5.7-inch TFT Color Display |
| Resolution | 6.5 Digits |
| Measurement Functions | DC/AC Voltage, DC/AC Current, Resistance, Capacitance, Frequency, Diode, Continuity |
| DC Voltage Range | 200 mV to 1000 V |
| DC Voltage Basic Accuracy | ±0.005% + 0.002% |
| AC Voltage Range | 200 mV to 750 V |
| AC Voltage Bandwidth | 1 Hz to 1 MHz |
| DC Current Range | 200 µA to 10 A |
| AC Current Range | 200 µA to 10 A |
| Resistance Range | 200 Ω to 100 MΩ |
| Capacitance Range | 2 nF to 10 mF |
| Frequency Range | 1 Hz to 1 MHz |
| True RMS Measurement | Yes |
| Interfaces | USB (standard), GPIB (optional), LAN (optional) |
| Data Logging | Yes (up to 100,000 readings) |
| Power Supply | 100-240 V AC, 50-60 Hz; 15 W |
| Dimensions (HxWxD) | 88 mm x 220 mm x 300 mm |
| Weight | 2.8 kg |
| Operating Temperature | 0°C to 50°C |
| Safety Rating | CAT I 1000 V, CAT II 600 V |
| Certifications | CE, CSA |
| Included Accessories | Power cord, Test leads, User manual, Software CD |
| Maintenance | Annual calibration recommended; clean with dry cloth |
| Repairability | Spare parts available through Rohde & Schwarz service centers |
Frequently Asked Questions - HMC8012 Rohde & Schwarz
How to perform a basic DC voltage measurement?
Connect the test leads to the V/Ω and COM terminals. Turn the rotary switch to DC V mode. Touch the probes to the circuit under test. Read the voltage on the display.
Is the HMC8012 suitable for high-precision measurements?
Yes, it offers 6.5-digit resolution and a basic DC voltage accuracy of ±0.005% + 0.002%, making it suitable for precision applications.
Can I connect the HMC8012 to a computer?
Yes, via the built-in USB interface. Optional GPIB or LAN interfaces are available for remote control and data logging.
How to update firmware?
Download the latest firmware from the Rohde & Schwarz website. Connect the device to a PC via USB, then use the Rohde & Schwarz Firmware Update Tool to install the update.
What safety precautions should I take?
Always observe the rated voltage limits (CAT I 1000 V, CAT II 600 V). Use proper test leads and ensure the device is grounded. Do not measure voltages exceeding the specified ranges.
How to measure capacitance?
Set the rotary switch to Capacitance mode (usually marked with a capacitor symbol). Discharge the capacitor before measurement, then connect the leads to the capacitor terminals. Read the value on the display.
How to perform a continuity test?
Turn the rotary switch to the Continuity/Diode mode. Touch the probes to the two test points. The multimeter will beep if the resistance is below a threshold (typically 50 Ω).
What is the maximum input voltage?
For DC measurements, the maximum input is 1000 V. For AC measurements, the maximum is 750 V RMS. Exceeding these may cause damage.
How to clean the device?
Disconnect the device from power. Use a soft, dry cloth to clean the exterior. Avoid liquids or abrasive cleaners. For persistent dirt, use a cloth slightly dampened with water.
Where can I find the user manual?
The user manual is available in PDF format on the Rohde & Schwarz website or on the included software CD. It can also be downloaded from notice-facile.com.
User questions about HMC8012 Rohde & Schwarz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual HMC8012 - Rohde & Schwarz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HMC8012 by Rohde & Schwarz.
USER MANUAL HMC8012 Rohde & Schwarz
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rohde & Schwarz
Model : HMC8012
Category : Multimeter