RTH1002 - Measuring equipment Rohde & Schwarz - Free user manual and instructions
Find the device manual for free RTH1002 Rohde & Schwarz in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Digital Oscilloscope |
| Brand | Rohde & Schwarz |
| Model | RTH1002 |
| Display | 8.5-inch TFT color touchscreen, 800 x 480 pixels |
| Bandwidth | 100 MHz |
| Sampling Rate | 1 GSa/s (single channel), 500 MSa/s (dual channel) |
| Channels | 2 isolated channels |
| Input Impedance | 10 MΩ ± 1% (parallel with 12 pF) |
| Max Input Voltage | 300 Vrms (CAT IV 600 V) |
| Power Supply | Built-in Li-ion battery (7.2 V, 5500 mAh) or AC adapter (12 V DC) |
| Battery Life | Approximately 4 hours of continuous operation |
| Weight | 1.3 kg with battery |
| Dimensions | 210 x 145 x 65 mm (without stand and handle) |
| Operating Temperature Range | 0°C to 40°C |
| Interfaces | USB (host and device), microSD, LAN (optional), Wi-Fi (optional) |
| Safety Rating | CAT IV 600 V (inputs), CAT III 1000 V |
| Languages | Multilingual menu (up to 10 languages) |
| Warranty | 3 years standard |
| Included Accessories | Two passive probes (RT-ZP10), AC adapter, battery, USB cable, quick start guide |
| Certifications | CE, UKCA, CSA, FCC |
| Maintenance Instructions | Clean with a soft, dry cloth; avoid solvents. Calibrate annually. |
| Spare Parts Availability | Probes, battery, AC adapter, stand, protective cover available from Rohde & Schwarz or authorized distributors. |
| Repairability | Serviceable by qualified technician; spare parts available for at least 5 years after discontination. |
| Key Functions | Automatic measurements, FFT analysis, serial decoding (I2C, SPI, UART, CAN, LIN), math functions, segmented memory, mask testing |
Frequently Asked Questions - RTH1002 Rohde & Schwarz
How do I perform a firmware update on the RTH1002?
Download the latest firmware from the Rohde & Schwarz website, save it to a USB flash drive formatted as FAT32, insert the drive into the oscilloscope, navigate to 'System > Update', and follow the on-screen instructions. Do not turn off the device during the update.
What is the maximum input voltage for the isolated channels?
The maximum rated input voltage is 300 Vrms for CAT IV 600 V or CAT III 1000 V. Refer to the safety category label on the device for specific limits. Use only rated probes.
How can I extend the battery life of my RTH1002?
To maximize battery life, reduce screen brightness, disable Wi-Fi and LAN when not in use, and set the auto-off timer. The battery typically lasts about 4 hours. Replace the battery when it no longer holds a charge.
Can the RTH1002 be used for automotive bus analysis?
Yes, the RTH1002 supports serial decoding for protocols such as CAN, LIN, I2C, SPI, and UART. You need to connect the appropriate probes and set up the decoding in the 'Decode' menu.
How do I compensate a passive probe?
Connect the probe to the oscilloscope channel and the compensation output (usually a 1 kHz square wave). Adjust the probe's compensation trimmer until the displayed square wave has flat tops and sharp corners. Refer to the probe manual for detailed steps.
What maintenance is required for the RTH1002?
Regularly clean the exterior with a soft, dry cloth. Avoid using any solvents or abrasive cleaners. Calibrate the oscilloscope annually to ensure measurement accuracy. Check the battery and probes for wear.
Is the RTH1002 suitable for high-voltage measurements?
Yes, it has isolated channels rated for CAT IV 600 V and CAT III 1000 V, making it suitable for industrial power applications. Always use properly rated probes and follow safety guidelines.
How do I save a waveform or screen image?
Insert a USB flash drive, press the 'Save' button (or use the touchscreen icon), select the format (CSV, BMP, etc.), and confirm. You can also save to internal memory or a microSD card.
Can I connect the RTH1002 to a PC for remote control?
Yes, you can connect via USB or optional LAN/Wi-Fi. Use software such as R&S ScopeSuite or VISA to send SCPI commands. Refer to the programming manual for command details.
Where can I find the user manual for the RTH1002?
The user manual is available for free download in PDF format from the Rohde & Schwarz website and from notice-facile.com. It covers operation, safety, specifications, and troubleshooting.
User questions about RTH1002 Rohde & Schwarz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual RTH1002 - Rohde & Schwarz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RTH1002 by Rohde & Schwarz.
USER MANUAL RTH1002 Rohde & Schwarz
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rohde & Schwarz
Model : RTH1002
Category : Measuring equipment