SN23HB62MT - Dishwasher SIEMENS - Free user manual and instructions
Find the device manual for free SN23HB62MT SIEMENS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Siemens |
| Model | SN23HB62MT |
| Dimensions (H x W x D) | 84.5 cm x 60 cm x 60 cm |
| Net Weight | Approx. 50 kg |
| Power Supply | 220-240 V, 50/60 Hz, 10 A |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | ~290 kWh |
| Water Consumption per Cycle | ~9.5 L |
| Noise Level | 42 dB(A) re 1 pW |
| Place Settings | 13 |
| Number of Programs | 5 (Eco, Auto, Intensive, Quick, Glass) |
| Special Features | AquaStop, VarioSpeed Plus, EcoSilence Drive, Load Sensor |
| Salt and Rinse Aid Indicator | Yes |
| Self-Cleaning Filter | Yes, 3-layer stainless steel |
| Maintenance | Clean filter regularly, run maintenance cycle with descaler |
| Safety Features | AquaStop (water protection), child lock |
| Spare Parts Availability | 10 years after discontinuation |
| User Manual | Available for free download at notice-facile.com |
Frequently Asked Questions - SN23HB62MT SIEMENS
How do I start a wash cycle on the Siemens SN23HB62MT?
Press the On/Off button, select a program (e.g., Eco), and then press Start. Ensure water supply is open and detergent is added.
What does the error code E15 mean?
E15 indicates a water leak or AquaStop activation. Turn off the water tap, unplug the appliance, and contact service. The base may need drying.
How do I clean the filters?
Remove the lower rack, twist the coarse filter counterclockwise, and pull out the microfilter. Rinse under running water and reassemble. Do this monthly.
Can I open the dishwasher during a cycle?
Yes, pause the cycle by pressing Start and then open the door. Close and press Start again to resume. Hot steam may escape.
What detergent should I use?
Use dishwasher detergent (powder, gel, or tablets). For best results in hard water, add rinse aid and salt. Follow the dosage guide.
How do I activate the child lock?
Press and hold the Intensive and Quick buttons for 3 seconds until the child lock symbol appears. Repeat to deactivate.
Why is there water left in the bottom after a cycle?
Check for a blocked filter or drain hose. Ensure the drain hose is not kinked. If persistent, run a drain pump check cycle (refer to manual).
How often should I run a maintenance cycle?
Every 3 months, run a 65°C program with a dishwasher cleaner (e.g., Finish Machine Clean) to remove grease and limescale.
What is the maximum amount of salt to add?
Fill the salt reservoir completely before first use. The capacity is approximately 1.4 kg. Use only dishwasher salt. Check indicator light.
How do I reset the appliance?
Turn off the dishwasher and unplug for 1 minute. Plug back in and turn on. If an error persists, consult the manual or call service.
User questions about SN23HB62MT SIEMENS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SN23HB62MT - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SN23HB62MT by SIEMENS.