FJ-X3m - Remote trigger Westcott - Free user manual and instructions
Find the device manual for free FJ-X3m Westcott in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Remote Trigger |
| Brand | Westcott |
| Model | FJ-X3m |
| Compatibility | Westcott FJ series flashes; other flashes with PC sync or 2.4GHz receiver |
| Wireless Frequency | 2.4 GHz |
| Maximum Range | Up to 328 ft (100 m) |
| Number of Channels | 16 |
| Number of Groups | 3 |
| Hot Shoe Mount | Yes, standard ISO |
| Power Source | 2x AA batteries (alkaline or rechargeable) |
| Battery Life | Approximately 50 hours standby |
| Sync Speed | Up to 1/250 sec |
| Dimensions (LxWxH) | 4.5 x 2.5 x 1.5 in (11.4 x 6.4 x 3.8 cm) |
| Weight (without batteries) | 4.5 oz (128 g) |
| Ports | Micro USB (firmware update), PC sync port |
| Display | LCD screen with backlight |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Construction Material | Polycarbonate with rubber grip |
| Cleaning | Wipe with a soft, dry cloth; avoid solvents |
| Storage | Remove batteries if storing for extended periods |
Frequently Asked Questions - FJ-X3m Westcott
How do I pair the FJ-X3m with a Westcott FJ flash?
Ensure both devices are powered on. Set the trigger and flash to the same channel and group using the LCD menu. The flash should respond when you press the test button.
What is the maximum range of the FJ-X3m?
The maximum range is up to 328 feet (100 meters) in open air with line of sight. Walls and obstacles may reduce range.
Can I use the FJ-X3m with non-Westcott flashes?
Yes, you can use it with any flash that has a PC sync port or a compatible 2.4GHz receiver. You may need a PC sync cable or a receiver from Westcott's system.
How many channels and groups does it support?
It supports 16 channels and 3 groups. This allows you to control multiple flashes independently.
What type of batteries does it use?
It uses 2x AA batteries (alkaline or rechargeable). Battery life is approximately 50 hours in standby mode.
How do I update the firmware on the FJ-X3m?
Connect the trigger to your computer via Micro USB cable. Download the latest firmware from Westcott's website and follow the update instructions.
What is the maximum sync speed?
The maximum sync speed is 1/250 second. For higher speeds, use high-speed sync (HSS) if supported by your flash and camera.
Does the FJ-X3m support TTL (Through-The-Lens) metering?
No, the FJ-X3m is a manual trigger. It does not support TTL. You must set flash power manually.
How do I reset the FJ-X3m to factory settings?
Press and hold both the Mode and Test buttons for 5 seconds until the display resets. This clears all custom settings.
Can I use it as a shutter release?
No, the FJ-X3m is designed for flash triggering only. For camera shutter release, use a dedicated remote.
User questions about FJ-X3m Westcott
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote trigger in PDF format for free! Find your manual FJ-X3m - Westcott and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FJ-X3m by Westcott.
USER MANUAL FJ-X3m Westcott
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Westcott
Model : FJ-X3m
Category : Remote trigger