Frequently Asked Questions - BoostWash BWM3641 Becken
How do I clean the drum of the Becken BoostWash BWM3641?
The self-cleaning drum feature helps maintain hygiene. Run the Drum Clean program monthly with a drum cleaner tablet or a cup of white vinegar. Wipe the door seal with a damp cloth after each use.
What should I do if the washing machine does not start?
Check that the door is fully closed, the water tap is open, and the machine is plugged in. Also verify that the child lock is not activated. If the issue persists, consult the manual for error codes.
How do I activate the child lock?
Press and hold the Child Lock button for 3 seconds until the indicator lights up. This prevents accidental changes to the settings. To deactivate, press and hold again.
What is the maximum spin speed?
The maximum spin speed is 1400 rpm. You can adjust it for different fabric types. Higher speeds reduce drying time but may crease delicate fabrics.
How do I use the delay start feature?
Select your desired program, then press the Delay Start button repeatedly to set the delay in hours (up to 24). The display will show the remaining time. The machine will start automatically at the set time.
Why is the washing machine vibrating excessively?
Ensure the machine is level by adjusting the feet. Also, avoid overloading or unbalanced loads. The transportation bolts must be removed before use. Check the manual for the correct removal procedure.
What programs are available?
The Becken BoostWash BWM3641 offers 15 programs including Cotton, Synthetic, Delicates, Wool, Quick 15min, Eco, Drum Clean, and more. Refer to the program chart in the manual for details.
How do I install the washing machine?
Install the machine on a stable, hard surface. Remove the transportation bolts from the back. Connect the inlet hose to a water tap with a 3/4 inch thread. Insert the drain hose into a standpipe or sink. Level the machine by adjusting the feet.
What is the energy efficiency class?
The energy efficiency class is E (according to EU energy label). Annual energy consumption is approximately 200 kWh based on typical usage.
Where can I find replacement parts?
Replacement parts such as inlet hoses, drain hoses, and filters can be ordered from authorized Becken service centers or online retailers. For specific parts, check the manual or contact Becken customer support.
USER MANUAL BoostWash BWM3641 Becken
