DXPW3400 - Pressure washer DEWALT - Free user manual and instructions
Find the device manual for free DXPW3400 DEWALT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | High pressure washer |
| Brand | DeWalt |
| Model | DXPW3400 |
| Maximum pressure | 3400 PSI (234 bar) |
| Water flow rate | 2.5 GPM (9.5 L/min) |
| Engine type | 4-stroke gasoline engine, OHV |
| Engine displacement | 196 cc |
| Starting system | Recoil starter |
| Pump type | Brass axial pump |
| Detergent tank | Integrated, capacity 1.5 L |
| High pressure hose | 7.6 m (25 ft) reinforced rubber |
| Nozzle | 5 Quick-Connect nozzles (0°, 15°, 25°, 40°, soap) |
| Dimensions (L x W x H) | 66 x 51 x 58 cm |
| Weight | 36.3 kg (80 lb) |
| Power source | Unleaded gasoline |
| Fuel tank capacity | 1.5 L |
| Engine oil type | SAE 10W-30 (0.6 L) |
| Noise level | 88 dB(A) |
| Main functions | Cleaning of exterior surfaces, vehicles, patios, driveways |
| Maintenance and cleaning | Drain oil, change spark plug, clean air filter |
| Safety | Automatic engine shutdown on low oil level |
| Spare parts and repairability | Pump, engine, nozzles, hose available |
| Warranty | 2 years |
Frequently Asked Questions - DXPW3400 DEWALT
What type of oil to use for the DeWalt DXPW3400 engine?
Use SAE 10W-30 quality engine oil. The capacity is approximately 0.6 liters. Check the level before each use.
How to start the DeWalt DXPW3400 pressure washer?
Make sure the fuel and oil tanks are full. Open the fuel valve, set the choke to closed position, pull the recoil cord until the engine starts, then gradually open the choke.
What is the maximum pressure of the DXPW3400?
The maximum pressure is 3400 PSI (234 bar). However, always use the appropriate pressure for the surface being cleaned to avoid damage.
Can I use rainwater or well water with this pressure washer?
Yes, but make sure the water is clean and filtered to avoid damaging the pump. Stagnant water or water containing debris can reduce the lifespan of the device.
How to maintain the pump of the pressure washer?
Use a fuel stabilizer if not used for more than 30 days. Drain water from the pump after each use by running the engine dry for a few seconds. Change the pump oil every 50 hours of use.
What to do if the engine does not start?
Check the oil level (engine cuts off if low), fuel presence, spark plug, and air filter. Ensure the fuel valve is open and the choke is in the correct position.
How to store the pressure washer for winter?
Drain all fuel or add a stabilizer. Change the oil. Clean the pump by running the engine with pump antifreeze. Store in a dry, frost-free place.
Which nozzle to use to wash a car?
Use the 40° (green) nozzle to avoid damaging the paint. Keep the nozzle at least 30 cm from the surface and use a suitable detergent.
Can the pressure washer be used with hot water?
No, the DeWalt DXPW3400 is designed for cold water only. Hot water can damage the pump and seals.
Where can I find spare parts for the DXPW3400?
You can order parts from authorized DeWalt dealers or online. Common parts such as the pump, nozzles, and hose are generally available.
User questions about DXPW3400 DEWALT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual DXPW3400 - DEWALT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DXPW3400 by DEWALT.
USER MANUAL DXPW3400 DEWALT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEWALT
Model : DXPW3400
Category : Pressure washer