MQ6FX - Mixer Proel - Free user manual and instructions
Find the device manual for free MQ6FX Proel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Analog Audio Mixer with Digital Effects |
| Number of Channels | 6 (4 mono + 1 stereo) |
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | Mic: 2 kΩ; Line: 10 kΩ |
| Output Impedance | 100 Ω |
| Maximum Input Level | +22 dBu |
| Signal-to-Noise Ratio | >90 dB |
| Total Harmonic Distortion | <0.01% |
| Power Supply | 12 V DC, 500 mA (via included adapter) |
| Dimensions (W x D x H) | 200 x 200 x 50 mm |
| Weight | 1.2 kg |
| Built-in Effects | 16 digital effects (reverb, delay, chorus, etc.) |
| EQ per Channel | 3-band (High, Mid, Low) |
| Phantom Power | +48 V (switchable per channel) |
| Main Output | Balanced XLR & 1/4" TRS |
| Headphone Output | 1/4" TRS with volume control |
| Aux Sends | 1 pre-fader send |
| USB Port | Not available |
| Cleaning Instructions | Use a dry, soft cloth; avoid solvents |
| Safety Precautions | Keep away from moisture, do not open, use only supplied power adapter |
| Reparability | Contact authorized service center; no user-serviceable parts inside |
Frequently Asked Questions - MQ6FX Proel
How do I connect a microphone to the MQ6FX?
Connect your XLR microphone to a mono input channel (1-4). Ensure the phantom power (+48V) is enabled if using a condenser microphone by pressing the corresponding switch on the channel strip.
Can I use the mixer with a computer?
The MQ6FX does not have a USB interface. To record to a computer, connect the main output or aux send to an external audio interface.
How do I apply effects to a channel?
Adjust the AUX send knob on the desired channel to send signal to the internal effects processor. Then select an effect using the rotary encoder and adjust the FX return level on the master section.
What is the power requirement?
The mixer requires a 12V DC, 500mA power supply. Use only the included adapter to avoid damage.
Why is there no sound from the main output?
Check that the main volume fader is up, the channel faders are up, and the mute buttons are not engaged. Also verify cables and connections.
Can I use the mixer with battery power?
No, the MQ6FX must be powered via the AC adapter. It does not have battery capability.
How do I clean the mixer?
Disconnect power. Use a slightly damp, lint-free cloth to wipe the surface. Do not use alcohol or abrasive cleaners. Keep liquids away from the controls.
What type of headphones should I use?
Use stereo headphones with a 1/4 inch (6.35 mm) plug. The headphone output is designed for headphones with an impedance of 32 ohms or higher.
How do I reset the effects?
Turn the mixer off and on again. The effects will return to default settings. There is no factory reset button.
Is the mixer rack-mountable?
The MQ6FX is not rack-mountable. It is designed as a desktop unit with a compact form factor.
User questions about MQ6FX Proel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual MQ6FX - Proel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MQ6FX by Proel.
USER MANUAL MQ6FX Proel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Proel
Model : MQ6FX
Category : Mixer