VENTIS 115MA - Speaker FBT - Free user manual and instructions
Find the device manual for free VENTIS 115MA FBT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active PA Speaker |
| Woofer Size | 15" (380 mm) |
| Tweeter Size | 1" (25 mm) compression driver |
| Amplifier Type | Class D bi-amplified |
| Power Rating | 700 W RMS (LF: 500 W, HF: 200 W) |
| Frequency Response | 50 Hz – 20 kHz |
| Maximum SPL | 127 dB peak |
| Coverage Angle | 90° H x 60° V |
| Input Connectors | XLR (balanced) |
| Power Supply | 100 – 240 V AC, 50/60 Hz |
| Dimensions (H x W x D) | 690 x 450 x 400 mm |
| Weight | 22 kg |
| Enclosure Material | Plywood with black paint |
| Grille | Steel with black coating |
| DSP Features | Presets, EQ, limiter, delay |
| Cooling | Convection (no fan) |
| Mounting | Pole mount socket, M10 rigging points |
| Application | Live sound, installation, floor monitor |
Frequently Asked Questions - VENTIS 115MA FBT
How do I connect a microphone to the VENTIS 115MA?
Use a balanced XLR cable to connect your microphone to the input XLR connector. Ensure the microphone is turned on and the channel gain is adjusted appropriately.
Why is there no sound coming from the speaker?
Check that the speaker is powered on and the power LED is lit. Verify that the audio source is connected correctly and the volume is turned up. Also check the cable and ensure the input signal is present.
Can I use the VENTIS 115MA as a floor monitor?
Yes, the speaker can be placed on its side as a wedge monitor. It has a trapezoidal shape designed for stage monitoring.
What is the maximum power output of this speaker?
The built-in amplifier delivers 700 W RMS (500 W for the woofer and 200 W for the tweeter), providing a peak SPL of 127 dB.
How do I clean the speaker grille?
To clean the grille, use a soft brush or a vacuum cleaner with a brush attachment. For stubborn dirt, use a slightly damp cloth with mild soap. Avoid using solvents or abrasive cleaners.
Can I fly or suspend this speaker?
Yes, the VENTIS 115MA is equipped with M10 rigging points and a pole mount socket. For suspended installation, always use appropriate flying hardware and follow local safety regulations.
What should I do if the amplifier overheats?
The speaker has built-in thermal protection. If it overheats, the amplifier will automatically limit output or shut down. Ensure proper ventilation around the speaker and reduce the input level if it frequently goes into protection.
What type of cable do I need for the input?
Use a balanced XLR cable for best signal quality. Unbalanced cables (TS) may cause hum or signal loss over long distances.
Is the speaker suitable for outdoor use?
The VENTIS 115MA is designed for indoor and outdoor use but should be protected from rain and direct moisture. It is not weatherproof; use a cover or shelter if used outdoors.
How do I update the DSP firmware?
Firmware updates are performed via a USB connection using FBT's proprietary software. Visit the FBT website for the latest firmware and instructions. Always follow the update procedure carefully to avoid damaging the unit.
User questions about VENTIS 115MA FBT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual VENTIS 115MA - FBT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VENTIS 115MA by FBT.
USER MANUAL VENTIS 115MA FBT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FBT
Model : VENTIS 115MA
Category : Speaker