Stereo Box E - Hi-Fi System PRO-JECT - Free user manual and instructions
Find the device manual for free Stereo Box E PRO-JECT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Integrated Amplifier / Hi-Fi System |
| Brand | Pro-Ject |
| Model | Stereo Box E |
| Dimensions (W x H x D) | 206 x 72 x 200 mm (8.1 x 2.8 x 7.9 in) |
| Weight | 2.5 kg (5.5 lbs) |
| Power Supply | External power adapter, 18V DC 2.5A (included) |
| Power Consumption | Max 150W, Standby <0.5W |
| Output Power | 2 x 30W (4 Ohms), 2 x 20W (8 Ohms) |
| Audio Inputs | 3 x RCA Line, 1 x MM Phono, 1 x Bluetooth (aptX) |
| Audio Outputs | Speaker terminals, 1 x Pre-out, 1 x Headphone (6.3mm) |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Supported Speakers | 4-8 Ohms impedance |
| Bluetooth | Version 5.0, aptX codec |
| Remote Control | Included (infrared) |
| Care and Cleaning | Wipe with a soft dry cloth; avoid solvents and abrasives |
| Safety Precautions | Do not expose to moisture; ensure ventilation; disconnect power before cleaning |
| Spare Parts and Repairability | Contact Pro-Ject or authorized dealer; power adapter available separately |
| Warranty | 2 years (subject to local regulations) |
| General Information | Designed in Austria; minimalistic chassis with aluminum front |
Frequently Asked Questions - Stereo Box E PRO-JECT
How do I turn on the Stereo Box E?
Press the standby button on the front panel or the remote control. The LED indicator will turn blue when the unit is on.
How do I connect Bluetooth devices?
Press the Bluetooth button on the front or remote. The unit will enter pairing mode (LED blinks). Search for 'Pro-Ject Stereo Box E' on your device and connect.
What speakers can I use with the Stereo Box E?
Use passive speakers with an impedance between 4 and 8 Ohms. Connect them to the speaker terminals with proper gauge wire.
Does it have a built-in phono stage?
Yes, the MM Phono input is compatible with moving magnet cartridges. For moving coil cartridges, you need an external phono preamp.
How do I clean the unit?
Use a soft, dry cloth to wipe the surface. Do not use any chemical cleaners or abrasive materials. Unplug the power before cleaning.
What does the protection mode mean?
If the unit shuts down or the LED turns red, it may be in protection mode due to overheating, short circuit, or overload. Check speaker connections and ensure proper ventilation. Turn off and restart after a few minutes.
Can I use the Stereo Box E with a subwoofer?
Yes, use the Pre-out output to connect an active subwoofer. Set the subwoofer's crossover accordingly.
Is there a headphone output?
Yes, the 6.3mm headphone jack on the front panel mutes the speakers when headphones are inserted. Use headphones with impedance 16-600 Ohms.
How do I reset the Bluetooth module?
Press and hold the Bluetooth button for 5 seconds until the LED flashes rapidly. This clears the pairing list and enters pairing mode.
What should I do if the unit does not power on?
Check the power adapter connection and try a different wall outlet. Ensure the adapter is the correct model (18V 2.5A). If the issue persists, contact Pro-Ject customer support.
User questions about Stereo Box E PRO-JECT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual Stereo Box E - PRO-JECT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stereo Box E by PRO-JECT.
USER MANUAL Stereo Box E PRO-JECT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PRO-JECT
Model : Stereo Box E
Category : Hi-Fi System