MM-4D/IN-X - Audio processor TASCAM - Free user manual and instructions
Find the device manual for free MM-4D/IN-X TASCAM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Digital audio processor |
| Brand | Tascam |
| Model | MM-4D/IN-X |
| Dimensions (W x D x H) | 483 x 44 x 200 mm (19" rack format, 1U) |
| Weight | 2.5 kg |
| Power supply | 100-240 V AC, 50/60 Hz, consumption 20 W |
| Analog audio inputs | 4 balanced inputs on 6.35 mm jack or XLR |
| Analog audio outputs | 4 balanced outputs on 6.35 mm jack or XLR |
| Digital inputs/outputs | AES/EBU and S/PDIF on RCA and XLR connectors |
| Network | Ethernet 100Base-TX for control and Dante audio (optional) |
| Main functions | Equalization, filtering, compression, limiting, delay, matrix mixing, audio routing |
| Audio processing | 32-bit floating point, 48 kHz / 96 kHz |
| Control | Pan, volume, mute, preset recall |
| Display | Backlit LCD 2x20 characters |
| Maintenance and cleaning | Clean with a soft dry cloth, avoid solvents. Disconnect before cleaning. |
| Safety | Indoor use only, do not expose to moisture, follow grounding instructions. |
| Spare parts and repairability | Parts available from Tascam after-sales service. Repair by an authorized technician. |
| General information | Operating temperature: 5°C to 40°C, humidity 30-85% non-condensing. |
Frequently Asked Questions - MM-4D/IN-X TASCAM
How to connect the MM-4D/IN-X to an existing audio system?
Use the balanced analog inputs (Jack/XLR) to connect audio sources. The analog outputs can be connected to amplifiers or active speakers. For digital integration, use the AES/EBU or S/PDIF inputs/outputs.
Can I control the processor remotely?
Yes, via the Ethernet port, you can use a dedicated control software like MM-4D Control to adjust parameters from a computer.
How to perform a factory reset?
Hold down the Preset button while powering on the device. The screen will display 'Factory Reset'. Confirm with the wheel.
What is the difference between the MM-4D/IN-X and MM-4D/IN models?
The /IN-X model has an expansion card for audio over IP (Dante), while the standard model is limited to analog and conventional digital connections.
How to set a delay on an output?
Access the Delay menu via the screen or software. Select the desired output, then set the delay in milliseconds or meters according to your need.
The processor does not turn on, what to do?
Check the power cable and wall outlet. Make sure the fuse is not blown (located next to the AC input). If the problem persists, contact customer service.
How to save a user preset?
After adjusting parameters, press Store, choose a free location (1 to 16) and confirm. The preset is saved in non-volatile memory.
Can I use the MM-4D/IN-X in audio matrix mode?
Yes, the processor allows full matrix routing: each input can be sent to any output with level adjustment and individual processing.
What is the audio processing latency?
Latency is less than 1 ms at 48 kHz thanks to 32-bit floating point processing, making it suitable for real-time applications.
Where to find the latest firmware version?
Go to the official Tascam website, Downloads section. Download the file and follow the update procedure via Ethernet.
User questions about MM-4D/IN-X TASCAM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio processor in PDF format for free! Find your manual MM-4D/IN-X - TASCAM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MM-4D/IN-X by TASCAM.
USER MANUAL MM-4D/IN-X TASCAM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TASCAM
Model : MM-4D/IN-X
Category : Audio processor