Epic Four - Receiver AudioControl - Free user manual and instructions
Find the device manual for free Epic Four AudioControl in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4-Channel Amplified Receiver |
| Number of Channels | 4 |
| Power Output (RMS) | 75W x 4 at 4 ohms |
| Power Output (Max) | 150W x 4 at 2 ohms |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | > 90dB |
| Input Sensitivity | 200mV - 8V |
| Dimensions (W x H x D) | 10.0 x 2.0 x 6.0 inches |
| Weight | 3.0 lbs |
| Power Supply | 12V DC (vehicle electrical system) |
| Fuse Rating | 30A |
| Main Functions | Amplifier, crossover, bass boost, remote level control |
| Maintenance | Keep clean and dry; check connections periodically |
| Safety | Ensure proper fusing and grounding; avoid short circuits |
| Spare Parts & Repairability | Contact authorized service center for repairs |
| General Information | Designed for car audio systems; requires professional installation recommended |
Frequently Asked Questions - Epic Four AudioControl
What is the power output of the AudioControl Epic Four?
The Epic Four delivers 75W RMS per channel at 4 ohms, or 150W RMS per channel at 2 ohms.
How do I adjust the crossover settings?
Use the built-in crossover controls on the unit. It offers high-pass, low-pass, or full-range modes.
Can I bridge channels?
Yes, you can bridge channels 1-2 and 3-4 to achieve higher power output to a single speaker.
What type of power supply does it require?
It requires a 12V DC power source from a vehicle's electrical system, with a recommended 30A fuse.
How do I connect the remote level control?
Connect the remote control cable to the 'REM' terminal and the bass knob to the dedicated port.
What is the recommended impedance per channel?
The Epic Four is stable down to 2 ohms per channel, and 4 ohms when bridged.
Does it have a bass boost feature?
Yes, it includes a variable bass boost up to 12dB at 45Hz.
What is the signal-to-noise ratio?
The signal-to-noise ratio is greater than 90dB, ensuring clean audio reproduction.
How do I clean and maintain the receiver?
Keep the unit dry and free from dust. Use a mild cloth to clean the exterior. Avoid using harsh chemicals.
Where can I find spare parts or service?
Contact an authorized AudioControl service center for repairs or replacement parts.
User questions about Epic Four AudioControl
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Epic Four - AudioControl and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Epic Four by AudioControl.
USER MANUAL Epic Four AudioControl
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioControl
Model : Epic Four
Category : Receiver