EPIC2000 - Receiver AudioControl - Free user manual and instructions
Find the device manual for free EPIC2000 AudioControl in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Car Audio Signal Processor / Equalizer |
| Brand | AudioControl |
| Model | EPIC2000 |
| Dimensions (W x H x D) | Approximately 7.0 x 1.7 x 5.5 inches (178 x 43 x 140 mm) |
| Weight | Approximately 1.5 lbs (0.68 kg) |
| Power Supply | 12V DC (negative ground), 500 mA max |
| Audio Inputs | 2 pairs of RCA inputs (Front/Rear) |
| Audio Outputs | 4 pairs of RCA outputs (Front L/R, Rear L/R) |
| Frequency Response | 10 Hz – 20 kHz (±0.5 dB) |
| Signal-to-Noise Ratio | > 100 dB (A-weighted) |
| Total Harmonic Distortion (THD) | < 0.005% |
| Equalizer Bands | 13 bands per channel (25 Hz – 20 kHz) |
| Adjustable Crossover | High-pass, low-pass, and band-pass with variable slopes (12/24 dB/oct) |
| Output Voltage (max) | 8V RMS |
| Remote Control | Optional wired remote (sold separately) |
| Cleaning Instructions | Wipe with a dry or slightly damp cloth. Do not use solvents. |
| Safety Notes | Disconnect battery during installation; avoid short circuits; use proper gauge wiring. |
| Spare Parts / Repairability | Contact AudioControl support for authorized service centers. Some internal fuses are replaceable. |
| General Information | Designed for high-end car audio systems. Features 24-bit DSP processing and Auto-EQ with included microphone. |
Frequently Asked Questions - EPIC2000 AudioControl
How do I connect the EPIC2000 to my car stereo?
Connect the RCA outputs from your head unit to the Front/Rear Inputs on the EPIC2000. Then connect the processor outputs to your amplifiers. Ensure the ground wire is securely connected to a clean chassis point.
What is the recommended power supply for the EPIC2000?
Use a 12V DC negative ground system, with a fused connection to the battery (recommended fuse: 1A). The maximum current draw is 500 mA.
Can I use the EPIC2000 with a factory radio that has no RCA outputs?
Yes, but you will need a line output converter to convert speaker-level signals to RCA signals before connecting to the EPIC2000.
How do I set up the equalizer on the EPIC2000?
Use the built-in Auto-EQ function with the included microphone for automatic calibration. Alternatively, manually adjust the 13 bands per channel using the front panel controls or optional remote.
What is the crossover function and how do I use it?
The EPIC2000 has adjustable high-pass, low-pass, and band-pass filters with selectable slopes (12 or 24 dB/octave). This allows you to send specific frequency ranges to subwoofers, midrange, and tweeters.
My EPIC2000 is not powering on. What should I check?
First, verify the 12V power and ground connections are secure. Check the in-line fuse and the unit's internal fuse (if accessible). Ensure the remote turn-on wire (if used) is receiving 12V.
Can I use the EPIC2000 with multiple amplifiers?
Yes, the EPIC2000 has 4 pairs of RCA outputs (Front L/R and Rear L/R), allowing you to connect up to 4 amplifiers or channels.
Is the EPIC2000 compatible with high-voltage head units?
Yes, the unit can accept input voltages up to 8V RMS without distortion. For higher voltages, use the input gain control to adjust.
How do I clean and maintain the EPIC2000?
Disconnect power before cleaning. Wipe the exterior with a soft, dry cloth. Avoid using liquids or sprays. Keep ventilation holes clear.
Where can I find replacement parts or service for the EPIC2000?
Contact AudioControl customer support or visit their website for authorized service centers. Some internal fuses can be replaced by the user, but otherwise repair should be done by a professional.
User questions about EPIC2000 AudioControl
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual EPIC2000 - AudioControl and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EPIC2000 by AudioControl.
USER MANUAL EPIC2000 AudioControl
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioControl
Model : EPIC2000
Category : Receiver