PitchFactor - Processor EVENTIDE - Free user manual and instructions
Find the device manual for free PitchFactor EVENTIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pitch shifting/harmonizer effects processor |
| Brand | Eventide |
| Model | PitchFactor |
| Dimensions (W x D x H) | 5.1 in x 3.5 in x 2.0 in (13.0 cm x 8.9 cm x 5.1 cm) |
| Weight | 1.2 lb (544 g) |
| Power Supply | 9V DC, center negative, 250 mA minimum |
| Audio Inputs | 1 x 1/4" TS unbalanced |
| Audio Outputs | 1 x 1/4" TS unbalanced |
| MIDI I/O | 5-pin DIN In/Out |
| Bypass | True bypass (relay) |
| Effects Types | Pitch shifting, harmony, delay, chorus, flanger, vibrato, tremolo, filter, looper |
| Number of Presets | 100 user presets + 100 factory presets |
| Preset Naming | Up to 12 characters |
| Tempo Control | Tap tempo with footswitch, MIDI clock sync |
| Expression Pedal Input | 1 x TRS for expression pedal or external footswitch |
| Firmware Updates | Via USB (USB-B connector) |
| Construction | Aluminum chassis, steel enclosure |
| Warranty | 2 years limited |
| Country of Origin | Made in U.S.A. |
| Included Accessories | Power supply, quick start guide, registration card |
| Maintenance | Clean with a dry, lint-free cloth. Avoid moisture and solvents. |
| Safety Information | Use only the supplied power adapter. Do not expose to rain or moisture. Keep away from heat sources. |
| Repairability | Contact Eventide support or authorized service center for repairs. No user-serviceable parts inside. |
Frequently Asked Questions - PitchFactor EVENTIDE
How do I power the PitchFactor?
Connect a 9V DC, center negative power supply with at least 250 mA current to the 9V DC jack on the rear panel. Only use the included adapter or a comparable regulated supply.
How do I connect the PitchFactor to my guitar and amplifier?
Use a standard 1/4" instrument cable from your guitar to the INPUT jack, and another cable from the OUTPUT jack to your amplifier or the next pedal in your chain. Make sure both cables are firmly connected.
How do I tune my guitar using the PitchFactor?
Press and hold the TUNER footswitch (usually the left switch) to enter tuner mode. The display shows the note and the LEDs indicate whether you are flat, sharp, or in tune. Strum a string to tune. Press the same footswitch again to exit.
How do I save a preset?
Adjust the knobs and effects to your desired settings, then press and hold the PRESET button until the display flashes. Use the VALUE encoder to choose a preset location (1-100), then press PRESET again to save. Overwrite confirmation is required.
How do I reset the PitchFactor to factory defaults?
Power on the unit while holding down the POWER button (or specific front-panel buttons as per manual). Wait for the display to show 'FACTORY RESET'. Confirm by pressing the PRESET button. This erases all user presets.
Can I use an expression pedal with the PitchFactor?
Yes, connect an expression pedal (e.g., Eventide EXP-50) to the EXP PEDAL jack on the rear panel using a TRS cable. Assign the pedal to control parameters like pitch shift amount or effect blend in the system settings.
How do I update the firmware?
Download the latest firmware from Eventide's website. Connect the PitchFactor to your computer via USB (USB-B port), then run the update utility. Follow the on-screen instructions. Do not disconnect power during the update.
What MIDI functionality is available?
The PitchFactor supports MIDI In and Out through 5-pin DIN connectors. You can send and receive program changes, control changes, and sync tempo via MIDI clock. Detailed MIDI implementation is in the manual.
How do I clean the PitchFactor?
Unplug all cables and power. Use a soft, dry, lint-free cloth to gently wipe the exterior. Do not use any liquids, cleaners, or abrasives as they may damage the finish or electronics.
What should I do if the unit does not power on?
First, check that the power supply is properly connected and the outlet is live. Try a different known-good 9V DC supply with the correct polarity and current. If it still fails, contact Eventide support for further assistance.
User questions about PitchFactor EVENTIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual PitchFactor - EVENTIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PitchFactor by EVENTIDE.
USER MANUAL PitchFactor EVENTIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EVENTIDE
Model : PitchFactor
Category : Processor