UTD2025CL - Uncategorized Uni-T - Free user manual and instructions
Find the device manual for free UTD2025CL Uni-T in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Oscilloscope |
| Model | UTD2025CL |
| Brand | Uni-T |
| Bandwidth | 25 MHz |
| Number of Channels | 2 |
| Sample Rate | 250 MS/s |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| Time Base | 5 ns/div to 50 s/div |
| Display | 5.7-inch Color TFT LCD |
| Input Impedance | 1 MΩ || 15 pF |
| Maximum Input Voltage | 400 V (DC+AC peak) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Dimensions (W×H×D) | 320 × 155 × 105 mm |
| Weight | 2.5 kg |
| Interface | USB Host, USB Device, Pass/Fail |
| Probe Compensation | Built-in 1 kHz square wave output |
| Main Functions | Waveform capture, FFT, automatic measurements, cursor measurement, data storage |
| Maintenance & Cleaning | Clean with a soft dry cloth; calibrate annually |
| Safety | Complies with CAT II safety standards |
| Spare Parts & Repairability | Contact authorized service center for replacement parts and repairs |
Frequently Asked Questions - UTD2025CL Uni-T
How do I calibrate the UTD2025CL oscilloscope?
To calibrate, connect the probe to the probe compensation output (1 kHz square wave) on the front panel. Adjust the probe's trimmer capacitor until the square wave is displayed without overshoot or rounding. Follow the manual for full calibration.
What is the maximum input voltage for the UTD2025CL?
The maximum input voltage is 400 V (DC + AC peak) per channel. Do not exceed this to avoid damage.
How can I measure frequency using the UTD2025CL?
Press the Measure button, select Frequency from the automatic measurements list. The oscilloscope will display the frequency of the triggered signal.
What file formats does the UTD2025CL support for saving waveforms?
Waveforms can be saved as CSV, BMP, or SET (setup) files via USB to a PC or internal memory.
How do I update the firmware on the UTD2025CL?
Download the latest firmware from the Uni-T website, copy it to a FAT32 USB drive, insert into the oscilloscope, and press Utility > Firmware Update. Follow on-screen instructions.
Can I use the UTD2025CL with a differential probe?
Yes, you can use a differential probe. Ensure the probe's output is compatible with the 1 MΩ input impedance and set the vertical scale accordingly.
What is the warranty period for the UTD2025CL?
Uni-T provides a standard 2-year warranty against defects in materials and workmanship. Contact local distributor for details.
How do I reset the UTD2025CL to factory settings?
Press Utility > Default Setup, or press and hold the Save/Recall button while powering on until the screen shows 'Factory Reset'.
What triggers are available on the UTD2025CL?
The oscilloscope supports Edge, Video, Pulse Width, and Slope triggers. Trigger source can be CH1, CH2, External, or AC Line.
How do I clean the screen and body of the UTD2025CL?
Use a soft, lint-free cloth slightly dampened with water or mild detergent. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.
User questions about UTD2025CL Uni-T
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual UTD2025CL - Uni-T and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UTD2025CL by Uni-T.
USER MANUAL UTD2025CL Uni-T
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Uni-T
Model : UTD2025CL
Category : Uncategorized