PowerShot PS60843 - Pressure washer Simpson - Free user manual and instructions
Find the device manual for free PowerShot PS60843 Simpson in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | High pressure cleaner |
| Brand | Simpson |
| Model | PowerShot PS60843 |
| Maximum pressure | 2000 PSI (13.8 MPa) |
| Water flow | 1.2 GPM (4.5 L/min) |
| Engine type | Universal electric motor |
| Power supply | 120 V, 60 Hz, 13 A |
| Net weight | 14.5 kg |
| Dimensions (L x W x H) | 50 x 40 x 30 cm |
| High pressure hose length | 10 m |
| Pump type | Triple brass piston pump |
| Adjustable pressure | Yes, via trigger and regulator |
| Automatic shut-off | Yes, total stop system (TSS) |
| Included accessories | Rotating nozzle, variable pressure nozzle, wand, trigger gun, detergent nozzle |
| Safety | Safety trigger, leak detection, thermal protection |
| Maintenance | Regular cleaning of water inlet filter, engine oil change after 50 h |
| Repairability | Spare parts available (seal kit, pump, engine) |
Frequently Asked Questions - PowerShot PS60843 Simpson
How to start the Simpson PowerShot PS60843 high pressure cleaner?
Make sure the garden hose is connected and the water is turned on. Plug the cleaner into a 120 V outlet. Press the on/off switch. Hold the gun firmly, press the safety trigger then the main trigger to release air. The motor automatically stops when you release the trigger.
What is the maximum pressure of this unit?
The maximum pressure is 2000 PSI (13.8 MPa). This pressure is sufficient for cleaning patios, vehicles, and exterior walls. Do not use a nozzle that is too narrow to avoid damaging sensitive surfaces.
How to adjust pressure on the PS60843?
You can adjust pressure in two ways: by turning the variable pressure nozzle to change the spray (wider = lower pressure) or by using the pressure regulator on the wand. Some models have direct control on the gun.
What to do if the cleaner does not start?
First check that the unit is plugged in and the outlet works. Make sure the water supply is on and the inlet filter is not clogged. If the problem persists, the thermal cut-off may have tripped; let it cool for 15 minutes before restarting.
How to use detergent with this cleaner?
Use the provided detergent nozzle. Fill the detergent reservoir or use a bucket with the suction hose. Attach the nozzle to the wand, then apply detergent at reduced pressure. Let it sit for a few minutes, then rinse with the high pressure nozzle.
What type of oil to use for the engine?
Use SAE 30 engine oil or a non-detergent oil of equivalent viscosity. Change the oil after the first 50 hours of operation, then annually. The oil level should be between the min and max marks on the dipstick.
How to clean the water inlet filter?
Unscrew the water inlet fitting at the back of the cleaner. Remove the mesh filter. Rinse it with clean water to remove debris. Put the filter back and retighten the fitting. Do this regularly to maintain optimal flow.
Why does the cleaner stop intermittently?
This is normal: the automatic shut-off system (TSS) cuts the motor when the trigger is released to save energy and prolong pump life. The motor restarts as soon as you press the trigger. If restart is slow, check residual pressure.
How to winterize the high pressure cleaner?
Before winter, drain all water from the hose and pump. Use a pump antifreeze product or run the unit with antifreeze water. Store it in a dry, frost-free place. Disconnect the garden hose and accessories.
Where to find spare parts for the Simpson PS60843?
Spare parts are available from authorized Simpson dealers or on specialized websites. You can order seal kits, nozzles, wands, or the complete pump. Mention the PS60843 model to get the correct references.
User questions about PowerShot PS60843 Simpson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual PowerShot PS60843 - Simpson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerShot PS60843 by Simpson.
USER MANUAL PowerShot PS60843 Simpson
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Simpson
Model : PowerShot PS60843
Category : Pressure washer