SB-5450 - Router Shinybow - Free user manual and instructions
Find the device manual for free SB-5450 Shinybow in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Shinybow |
| Model | SB-5450 |
| Dimensions | 200 x 150 x 30 mm |
| Weight | 0.5 kg |
| Power Supply | 12V DC, 1A |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| WAN Port | 1 x 10/100 Mbps |
| LAN Ports | 4 x 10/100 Mbps |
| Antenna | 2 x external 3 dBi |
| LED Indicators | Power, WAN, LAN, Wi-Fi |
| Buttons | Reset, WPS |
| Operating Temperature | 0 °C to 40 °C |
| Storage Temperature | -20 °C to 70 °C |
| Relative Humidity | 10% to 90% non-condensing |
| Security | WPA/WPA2, WEP |
| Mounting | Desktop or wall-mountable |
| Package Contents | Router, power adapter, Ethernet cable, manual |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - SB-5450 Shinybow
How do I reset the Shinybow SB-5450 to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds until the LEDs blink. Release the button; the router will reboot with factory settings.
What is the default IP address and login credentials for the SB-5450?
The default IP address is 192.168.1.1 with username admin and password admin. Change the password immediately for security.
How can I change the Wi-Fi password on my Shinybow SB-5450?
Log into the web interface, go to Wireless Settings > Security, enter a new passphrase, and click Save. The router will restart.
Does the SB-5450 support guest network?
Yes, the SB-5450 allows you to create a separate guest network with isolated access. Enable it in Wireless Settings > Guest Network.
How do I update the firmware of the Shinybow SB-5450?
Download the latest firmware from Shinybow's support site. In the web interface, go to Administration > Firmware Upgrade, select the file, and start the update. Do not power off during upgrade.
What is the maximum wireless speed of the SB-5450?
The SB-5450 uses 802.11n technology with a maximum speed of 300 Mbps (2.4 GHz, 40 MHz channel width).
Can I use the SB-5450 as a range extender?
Yes, the SB-5450 supports WDS (Wireless Distribution System) for bridging or repeating. Configure in Wireless Settings > WDS.
How do I block specific devices from accessing the internet?
Go to Access Control > MAC Filtering in the web interface. Enable filtering and add the MAC addresses of devices you want to block or allow.
What should I do if my SB-5450 keeps disconnecting?
Check for interference from other devices, try changing the wireless channel (1, 6, or 11), update firmware, or adjust antenna position. Also ensure the router is well-ventilated.
Is the Shinybow SB-5450 compatible with fiber optic connections?
Yes, the SB-5450 has a 10/100 Mbps WAN port that can connect to a fiber optic modem. No additional configuration needed.
User questions about SB-5450 Shinybow
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual SB-5450 - Shinybow and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SB-5450 by Shinybow.
USER MANUAL SB-5450 Shinybow
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Shinybow
Model : SB-5450
Category : Router