SB-5548LCM - Router Shinybow - Free user manual and instructions
Find the device manual for free SB-5548LCM Shinybow in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Shinybow |
| Model | SB-5548LCM |
| Dimensions (approx.) | 200 x 150 x 30 mm |
| Weight (approx.) | 300 g |
| Power Supply | DC 5V, 1A |
| Number of LAN Ports | 4 |
| Wireless Standard | 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Antenna Type | External, 2 dBi |
| Interface | RJ-45 for LAN/WAN |
| Security | WPA/WPA2, WEP |
| Management | Web-based GUI |
| LED Indicators | Power, WAN, LAN, WLAN |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with a soft, dry cloth |
| Safety | Keep away from water and heat sources |
| Spare Parts / Repairability | Not available separately; contact support |
Frequently Asked Questions - SB-5548LCM Shinybow
How do I reset the SB-5548LCM to factory defaults?
Press and hold the reset button on the back panel for about 10 seconds until the power LED blinks. Release the button and the router will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1, with username admin and password admin (or blank). Check the label on the router for specifics.
How can I change the Wi-Fi password?
Log into the web interface (192.168.1.1), go to Wireless Settings, and change the pre-shared key. Save the settings and reconnect devices.
The router is not connecting to the internet. What should I do?
Check that the WAN cable is securely connected to the modem. Verify the internet settings (PPPoE, DHCP, etc.) in the WAN section. Reboot both modem and router.
How do I update the firmware?
Download the latest firmware from the Shinybow support page. Log into the router, go to System Tools > Firmware Upgrade, select the file, and upload. Do not power off during update.
What should I do if I forgot my Wi-Fi password?
Connect a computer via Ethernet cable to the router. Log into the web interface and view the wireless security settings. The password is displayed under the pre-shared key field.
Can I use the router as a wireless repeater?
Yes, if the router supports bridge or repeater mode. Enable WDS or Repeater mode in Wireless Settings and enter the MAC address of the main router.
How many devices can connect simultaneously?
The router typically supports up to 20-30 simultaneous connections depending on network load and signal strength.
The router gets hot. Is that normal?
Some warmth is normal. Ensure the router is placed in a well-ventilated area away from direct sunlight and other heat sources. If excessively hot, contact support.
How do I contact Shinybow support?
Visit the official Shinybow website or email support@shinybow.com. Have your model number (SB-5548LCM) and serial number ready.
User questions about SB-5548LCM Shinybow
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual SB-5548LCM - Shinybow and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SB-5548LCM by Shinybow.