LED TMH-S200 - Lamp Eurolite - Free user manual and instructions
Find the device manual for free LED TMH-S200 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head LED Light |
| Brand | Eurolite |
| Model | LED TMH-S200 |
| Dimensions (with base) | 300 x 250 x 450 mm |
| Weight | 6.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 200W |
| Light Source | 200W LED (white) |
| DMX Channels | 14 or 16 channels |
| Pan Range | 540 degrees |
| Tilt Range | 270 degrees |
| Housing Material | Aluminum and plastic |
| Cooling | Fan cooled |
| Protection Rating | IP20 |
| Control Modes | DMX, Master/Slave, Auto, Sound-activated |
| Display | LED dot matrix with 4 buttons |
| Color Wheel | 7 colors + white |
| Gobo Wheel | 7 rotating gobos + open |
| Prism | 3-facet rotating prism |
| Dimmer | 0-100% linear |
| Strobe | 1-20 Hz |
| Maintenance | Clean lens and ventilation slots regularly |
| Safety | Overheat protection, auto-off if fan fails |
| Spare Parts | LED module, power supply, fan, gobos, fuses |
| General Information | Professional moving head suitable for stage, disco, and events |
Frequently Asked Questions - LED TMH-S200 Eurolite
How do I set the DMX address on the Eurolite LED TMH-S200?
Press the MENU button to enter the menu, use UP/DOWN to select DMX Address, press ENTER, then set the desired address using UP/DOWN and confirm with ENTER.
Can I use the TMH-S200 without a DMX controller?
Yes, it supports Master/Slave mode and Auto mode. In Auto mode, it runs built-in programs. In Master/Slave, one unit controls others via DMX cable.
What is the power consumption of the LED TMH-S200?
The maximum power consumption is 200W at full output. It operates on AC 100-240V, 50/60Hz.
How do I replace a fuse?
Disconnect the device from power. Locate the fuse holder near the power input. Use a flat screwdriver to open it and replace the blown fuse with one of the same rating (T2.5A/250V).
Why does my light not respond to DMX?
Check the DMX cable connection and ensure the DMX address matches the controller. Verify that the device is in DMX mode. Also ensure the controller is set to the correct universe.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with glass cleaner or isopropyl alcohol. Gently wipe the lens. Do not spray liquid directly on the fixture.
What is the pan/tilt range?
Pan: 540 degrees. Tilt: 270 degrees. The fixture can move smoothly across these ranges.
Can I replace the LED module?
Yes, the 200W LED module is replaceable. Contact Eurolite service or an authorized dealer for the exact spare part.
What safety precautions should I take?
Ensure proper ventilation around the fixture. Do not block fans. Use a safety cable when mounting. Disconnect power before maintenance. Do not look directly into the beam.
How many DMX channels does the TMH-S200 use?
It can operate in 14-channel or 16-channel mode. Refer to the manual for each channel's function.
User questions about LED TMH-S200 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual LED TMH-S200 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED TMH-S200 by Eurolite.
USER MANUAL LED TMH-S200 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED TMH-S200
Category : Lamp