Magnum Hazer - Effect machine MARTIN - Free user manual and instructions
Find the device manual for free Magnum Hazer MARTIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Hazer (Effect Machine) |
| Brand | Martin |
| Model | Magnum Hazer |
| Dimensions (L x W x H) | 560 x 290 x 320 mm |
| Weight | 14.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 1500 W |
| Fluid Consumption | 0.25 L/h at 100% output |
| Fluid Tank Capacity | 5 L |
| Haze Output | Continuous, adjustable flow rate |
| Control Protocol | DMX512, Analog 0-10 V, Standalone |
| DMX Channels | 1 or 2 channels |
| Warm-up Time | Approx. 8 minutes |
| Heater Type | High-efficiency block heater |
| Display | OLED with menu navigation |
| Mounting | Floor stand or hanging via Omega brackets |
| Maintenance | Clean heater and fan monthly; drain fluid if idle |
| Safety Features | Thermal cutout, low fluid shutdown, IP44 rated |
| Compatible Fluid | Martin Hazer Fluid or equivalent water-based |
| Spare Parts | Heater, pump, fan, circuit board available |
| Repairability | Modular design; all parts replaceable |
Frequently Asked Questions - Magnum Hazer MARTIN
What type of fluid does the Magnum Hazer require?
The Magnum Hazer uses water-based hazefluid. Martin recommends its own brand, but third-party water-based fluids compatible with hazers can also be used. Avoid oil-based fluids.
How do I clean the Magnum Hazer?
Regular cleaning is essential. Use a soft cloth and isopropyl alcohol to wipe the exterior. For the heater and fan, follow the manual: typically, flush with distilled water or a cleaning solution every 30 hours of use.
How do I set up DMX control?
Connect a DMX cable from your controller to the DMX input of the hazemachine. Set the desired DMX address via the menu using the OLED display. The default channel mode is 1-channel (output level). Refer to the manual for addressing.
The hazemachine is not producing haze. What could be wrong?
Check the fluid level: the tank may be empty. Ensure the fluid pump is primed by running the 'Prime' function in the menu. Also verify the heater has reached operating temperature (warm-up light turns green). If still not working, check fuses and DMX cable.
What are the power requirements?
The Magnum Hazer accepts 100-240 V AC at 50/60 Hz, making it suitable for worldwide use. Maximum power draw is 1500 W. Use a grounded outlet and avoid extension cords.
Can I hang the hazemachine upside down?
No, the Magnum Hazer should be operated upright only. Mounting upside down can damage the fluid system and void warranty. Use the provided brackets for secure floor or vertical hanging.
How long does it take to warm up?
The warm-up period is approximately 8 minutes. The OLED display will show a countdown. Haze output will be reduced until fully warmed.
What is the maximum output duration?
With a 5 L tank and at 100% output (0.25 L/h), continuous operation is about 20 hours. Lower output settings extend runtime. Always monitor fluid level.
Why is the hazemachine emitting a smell?
A slight smell during initial use is normal as the heater burns off manufacturing residues. If persistent, ensure you are using recommended fluid and clean the heater. Prolonged strong odor may indicate a problem; contact support.
Where can I find spare parts?
Spare parts are available through Martin authorized dealers or directly from Martin's website. Common parts include heater modules, pump assemblies, and fan kits. Always use genuine parts for safety and performance.
User questions about Magnum Hazer MARTIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Magnum Hazer - MARTIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Magnum Hazer by MARTIN.