SHS 100 - Boiler TEKA - Free user manual and instructions
Find the device manual for free SHS 100 TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas-fired condensing boiler |
| Model | SHS 100 |
| Brand | Teka |
| Energy Source | Natural gas (G20) / Propane (G31) |
| Nominal Power (Heating) | 24.0 kW |
| Nominal Power (DHW) | 28.0 kW |
| Efficiency Class | A |
| Seasonal Space Heating Efficiency (η_s) | 94% |
| Water Heating Efficiency (η_w) | 85% |
| Max Operating Pressure (Heating) | 3 bar |
| Max Operating Pressure (DHW) | 10 bar |
| Temperature Range (Heating) | 30 °C – 80 °C |
| Temperature Range (DHW) | 35 °C – 60 °C |
| DHW Flow Rate (ΔT=30°C) | 13.5 l/min |
| Dimensions (H x W x D) | 700 x 400 x 300 mm |
| Weight | 30 kg |
| Flue Gas Temperature | 60 °C (at nominal load) |
| Electrical Supply | 230 V ~ 50 Hz |
| Electrical Power Consumption | 120 W (max) |
| Protection Class | IPX4D |
| Safety Devices | Flame supervision, overheat thermostat, frost protection, pressure relief valve |
| Maintenance Frequency | Annual service by qualified technician |
| Spare Parts Availability | Genuine Teka parts available through authorized service centers |
Frequently Asked Questions - SHS 100 TEKA
What type of gas does the TEKA SHS 100 boiler use?
The boiler is designed for natural gas (G20) or propane (G31). Check the gas type label on your unit and ensure compatibility with your supply.
What is the power output of the SHS 100 boiler?
The heating output is 24.0 kW and the domestic hot water output is 28.0 kW, suitable for medium-sized homes.
How do I reset the boiler after a fault?
Press and hold the reset button (usually marked R) for 3 seconds. If the fault persists, consult the error code in the manual and contact a service technician.
What is the recommended maintenance schedule?
An annual service by a certified gas engineer is recommended to ensure safety, efficiency, and warranty compliance.
What does error code E01 mean on the display?
Error E01 typically indicates a lack of flame or ignition failure. Check gas supply, electrode cleanliness, and flue termination. If unresolved, call a technician.
Can I install the boiler myself?
No, installation must be carried out by a Gas Safe registered engineer (in the UK) or equivalent qualified professional in accordance with local regulations.
What is the maximum operating pressure for the heating circuit?
The maximum operating pressure for the central heating circuit is 3 bar. The safety valve opens at 3 bar to prevent overpressure.
How do I adjust the domestic hot water temperature?
Use the DHW temperature dial on the control panel. The range is 35 °C to 60 °C. Set to your preference, but avoid scalding temperatures.
Where can I find spare parts for the SHS 100?
Genuine Teka spare parts are available from authorized service centers. Contact Teka customer service or visit the official website for a list of distributors.
What is the noise level of the boiler?
The sound pressure level is typically less than 50 dB(A) at full load, making it quiet enough for installation in a utility room or kitchen.
User questions about SHS 100 TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual SHS 100 - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SHS 100 by TEKA.
USER MANUAL SHS 100 TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : SHS 100
Category : Boiler