601 - Turntable DUAL - Free user manual and instructions
Find the device manual for free 601 DUAL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Dual |
| Model | 601 |
| Category | Turntable |
| Drive System | Belt drive |
| Speeds | 33 1/3, 45 RPM |
| Platter Material | Aluminum die-cast |
| Tonearm Type | Straight, gimbal bearing |
| Cartridge Included | Ortofon OM series or equivalent |
| Stylus | Elliptical diamond |
| Anti-Skating | Adjustable |
| Pitch Control | ±10% |
| Output | RCA (phono level) |
| Dimensions (W x D x H) | 420 x 360 x 120 mm |
| Weight | 5.0 kg |
| Power Supply | AC 110-240V, 50/60 Hz |
| Power Consumption | 10 W |
| Maintenance | Clean stylus with appropriate brush; replace belt every 2-3 years |
| Safety | Unplug before cleaning; keep away from moisture |
| Spare Parts Available | Stylus, drive belt, motor |
| Repair Service | Professional servicing recommended for mechanical parts |
Frequently Asked Questions - 601 DUAL
How do I set up the Dual 601 turntable for the first time?
Place the turntable on a stable, level surface. Connect the RCA cables to your amplifier's phono input. For amplifiers without a phono input, use a separate phono preamp. Set the anti-skating dial to match the tracking force of your cartridge. Install the platter, belt, and mat.
What is the correct tracking force for the Dual 601?
The recommended tracking force depends on the cartridge. For the stock Ortofon OM10 or similar, set the counterweight to 1.75 grams. Always refer to the cartridge specifications for precise adjustment.
How do I change the belt on the Dual 601?
To change the belt: Remove the platter. Gently stretch the new belt over the motor pulley and onto the inner rim of the platter. Ensure it sits squarely. Replace the platter and check speed stability.
Why is there no sound coming from my turntable?
Check that the turntable is connected to the correct phono input. Ensure the cartridge wires are properly attached to the tonearm pins. Verify that the stylus is not broken or dirty. Test with a different amplifier if possible.
How do I adjust the speed on the Dual 601?
The Dual 601 has a speed selector for 33 and 45 RPM. If the speed is slightly off, use the pitch control knob located on the front panel to fine-tune up to ±10%. Use a strobe disc to visually verify correct speed.
What maintenance does the Dual 601 require?
Regularly clean the stylus with a brush. Every 6-12 months, lubricate the motor spindle with a drop of sewing machine oil. Check and replace the drive belt every 2-3 years. Keep the turntable covered when not in use.
Can I replace the cartridge on the Dual 601?
Yes, the Dual 601 accepts standard 1/2-inch mount cartridges. Remove the headshell, unscrew the old cartridge, and mount the new one. Be careful to align the stylus correctly and set tracking force and anti-skating accordingly.
How do I reduce vibration or rumble?
Place the turntable on a solid, isolated surface away from speakers. Ensure it is level using the adjustable feet. If using a wooden shelf, add a vibration-dampening mat under the turntable.
What is the correct anti-skating setting?
Set anti-skating to the same value as the tracking force. For example, if tracking force is 1.75g, dial anti-skating to 1.75. This ensures equal force on both groove walls.
Where can I find replacement parts for the Dual 601?
Replacement styli, belts, and cartridges are available from online retailers or specialist audio shops. For original parts, search for 'Dual 601 belt' or 'Dual stylus'. Always confirm compatibility with your model.
User questions about 601 DUAL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual 601 - DUAL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 601 by DUAL.