SBC-BuckBoost01 - Uncategorized Joy-It - Free user manual and instructions
Find the device manual for free SBC-BuckBoost01 Joy-It in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Buck-Boost DC-DC Converter Module |
| Input Voltage Range | 2.5 V - 16 V |
| Output Voltage Range | 2.5 V - 16 V (adjustable) |
| Maximum Output Current | 2 A |
| Efficiency | Up to 96% (typical) |
| Output Ripple | < 50 mV |
| Switching Frequency | 1.2 MHz |
| Dimensions (L x W x H) | 35 mm x 18 mm x 8 mm |
| Weight | 5 g |
| Input Protection | Reverse polarity protection (diode) |
| Output Protection | Overcurrent and short-circuit protection |
| Operating Temperature Range | -40°C to +85°C |
| Mounting | Solder pads (2.54 mm pitch) |
| Package Contents | 1x SBC-BuckBoost01 module |
| Compatible Devices | Single board computers (Raspberry Pi, Arduino, etc.) |
| Output Voltage Adjustment | Via trimmer potentiometer |
| Input Current (no load) | < 1 mA |
| Safety Certifications | RoHS compliant |
| Warranty | 2 years (against manufacturing defects) |
| Maintenance | Keep dry and clean; avoid dust accumulation |
Frequently Asked Questions - SBC-BuckBoost01 Joy-It
What is the input voltage range of the SBC-BuckBoost01?
The input voltage range is 2.5 V to 16 V DC. Ensure your power source is within this range.
How do I adjust the output voltage?
Use the trimmer potentiometer on the module. Turn it slowly while measuring the output voltage with a multimeter until you reach your desired voltage.
What is the maximum current output?
The maximum continuous output current is 2 A. Ensure your load does not exceed this limit.
Can this module be used with a Raspberry Pi?
Yes, the SBC-BuckBoost01 is designed to power single board computers like Raspberry Pi (requires 5 V). Adjust the output to 5 V and ensure sufficient current (e.g., 2.5 A for Pi 4).
Is there reverse polarity protection?
Yes, the module has a protection diode that prevents damage if the input is reversed. However, correct polarity is still strongly recommended.
What is the efficiency of the converter?
Typical efficiency is up to 96% under optimal conditions. Efficiency varies with input/output voltage difference and load.
How do I know if the module is short-circuit protected?
The module has overcurrent and short-circuit protection. In case of a short, the output will shut down and automatically recover once the fault is removed.
Can I use this module with a battery as input?
Yes, batteries with voltage between 2.5 V and 16 V are suitable. The buck-boost regulation allows stable output even as battery voltage drops.
What is the recommended input capacitor?
An input capacitor of 10 µF to 100 µF (low ESR) is recommended to reduce input ripple. The module does not include one by default.
How should I clean the module?
Use a soft brush or compressed air to remove dust. If needed, slightly dampen a cloth with isopropyl alcohol and gently wipe. Avoid water and excessive moisture.
User questions about SBC-BuckBoost01 Joy-It
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SBC-BuckBoost01 - Joy-It and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBC-BuckBoost01 by Joy-It.
USER MANUAL SBC-BuckBoost01 Joy-It
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Joy-It
Model : SBC-BuckBoost01
Category : Uncategorized