92273 - Tumble drier KENMORE - Free user manual and instructions
Find the device manual for free 92273 KENMORE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Kenmore |
| Model | 92273 |
| Product Type | Electric Dryer |
| Drum Capacity | 240 liters (7.0 cu ft) |
| Dimensions (W x D x H) | 68.6 x 73.7 x 91.4 cm (27 x 29 x 36 in) |
| Net Weight | 54.4 kg (120 lb) |
| Power Supply | 240 V, 30 A, 60 Hz |
| Main Functions | Automatic Dry Detection, Multiple Cycles (Cotton, Synthetic, Delicate, Easy Iron, Quick), low temperature drying option, delayed finish, end of cycle alarm |
| Maintenance and Cleaning | Clean the lint filter after each use, clean the moisture sensor with a soft cloth, drain the water tank if present (vented model). |
| Safety | Automatic shut-off in case of overheating, child safety (key lock) |
| Spare Parts and Repairability | Drum bands, rollers, belt, heating element, thermostat, door switch available |
| Compatibility | Requires NEMA 10-30 or 14-30 outlet, exhaust duct (if non-condenser) |
| Noise Level | Approximately 65 dB |
Frequently Asked Questions - 92273 KENMORE
How to clean the lint filter of the Kenmore 92273?
Open the door, locate the lint filter on the lower edge of the opening. Pull it up, remove lint by hand or with a vacuum, then replace it. Do this after each cycle.
What to do if the dryer does not heat?
First check that the circuit breaker has not tripped and the plug is properly connected. Then clean the lint filter and moisture sensor. If the problem persists, the thermostat or heating element may be faulty.
How to use the automatic drying cycle?
Select the 'Automatic' or 'Sensor Dry' cycle on the dial. The moisture sensor stops the cycle when the laundry is dry, preventing over-drying.
The drum turns but the laundry remains damp, what to do?
This may indicate a ventilation problem. Make sure the exhaust duct is not blocked and the lint filter is clean. If the problem persists, check the moisture sensor.
How to activate child safety?
Press and hold the 'Child Lock' or 'Lock' button for 3 seconds until the icon appears. To deactivate, repeat the operation.
What types of laundry not to put in the dryer?
Avoid drying items made of wool, silk, or those with a 'Line Dry' label. Delicate fabrics may shrink or be damaged.
How to reduce noise from the dryer?
Ensure the appliance is level. Use an anti-vibration mat. Check that there are no hard objects in the drum.
Where to find the user manual for the Kenmore 92273?
We have made the PDF manual available for free download on our site. You can also request it by email selecting your language.
How to replace the drum belt?
Unplug the appliance. Remove the front panel and pulley. Detach the old belt and install the new one following the diagram in the manual. If you are not handy, call a professional.
What does error code 'PF' mean?
The 'PF' code indicates a power failure during the cycle. The appliance will resume where it stopped once power is restored. If the code persists, reset the dryer by unplugging for 1 minute.
User questions about 92273 KENMORE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual 92273 - KENMORE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 92273 by KENMORE.
USER MANUAL 92273 KENMORE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KENMORE
Model : 92273
Category : Tumble drier