Rebel ZAB0121 - Scooter

ZAB0121 - Scooter Rebel - Free user manual and instructions

Find the device manual for free ZAB0121 Rebel in PDF.

📄 28 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Rebel ZAB0121 - page 9
View the manual : Deutsch DE English EN Polski PL Română RO
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electric Scooter
Brand Rebel
Model ZAB0121
Dimensions (Unfolded) Approx. 110 cm x 45 cm x 115 cm
Weight Approx. 12 kg
Max Rider Weight 100 kg
Battery Type Lithium-ion, 36 V
Battery Capacity 7.5 Ah
Charging Time 4-6 hours
Max Speed 25 km/h
Range Up to 25 km
Motor Power 350 W
Brakes Front and rear disc brakes
Tire Size 8.5 inches
Lighting Front LED headlight, rear reflector
Display LED dashboard with speed, battery, and mode indicators
Speed Modes Eco, Standard, Sport
Foldable Yes, with folding mechanism
Water Resistance IPX4 (splash resistant)
Maintenance Regularly check tire pressure, tighten screws, clean with damp cloth
Safety Always wear helmet, use lights at night, obey traffic rules
Spare Parts Replacement battery, charger, tires, brake pads available from authorized dealers

Frequently Asked Questions - ZAB0121 Rebel

What is the maximum speed of the Rebel ZAB0121?
The maximum speed is 25 km/h (15.5 mph) in Sport mode.
How long does it take to fully charge the battery?
Charging time is approximately 4 to 6 hours using the supplied charger.
What is the weight limit for the scooter?
The maximum rider weight is 100 kg (220 lbs).
Can I ride the scooter in the rain?
The scooter has an IPX4 water resistance rating, meaning it can withstand splashes. Avoid heavy rain and puddles.
How do I fold the scooter?
To fold, pull the locking mechanism on the stem, fold it down towards the deck, and secure the hook to the rear fender.
What type of brake does the ZAB0121 have?
It features front and rear disc brakes for reliable stopping power.
How far can I go on a single charge?
The range is up to 25 km (15.5 miles) depending on rider weight, terrain, and riding mode.
Where can I find replacement parts?
Replacement parts like batteries, tires, and brakes are available through authorized Rebel dealers or online.
Does the scooter have a warranty?
Yes, Rebel offers a 12-month warranty against manufacturing defects. Check your manual for details.
Can I adjust the handlebar height?
Yes, the handlebar height is adjustable by loosening the clamp, setting the desired height, and tightening securely.

User questions about ZAB0121 Rebel

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Scooter in PDF format for free! Find your manual ZAB0121 - Rebel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZAB0121 by Rebel.

USER MANUAL ZAB0121 Rebel

USER'S

MANUAL

DE EN RL RO

model: ZAB0121

Technical diagram of a mechanical device with numbered components and an inset close-up showing the assembly steps.

ROLLERFAHREN

AN IMPORTANT MESSAGE TO PARENTS: This manual

contains important information. For your child's safety, it is y responsibility to review this information with your child and make sure that your child understands all warnings, cautions.

instructions and safety topics. We recommend that you periodically re and reinforce the information in this manual with younger riders and you are required to inspect and maintain your child's scooter to insure safety.

Rebel ZAB0121 - AN IMPORTANT MESSAGE TO PARENTS: This manual - 1

GENERAL WARNING: Scooter riding can be a hazardous acti Scooters can, and are intended to move and it is therefore possible to get into dangerous situations and/or lose control or fall. If such things occur you can be seriously injured.

LIKE ANY OTHER MOVING PRODUCT, USING A SCOOTER CAN BE DANGEROUS ACTIVITY AND MAY RESULT IN INJURY EVEN WHEN USED WITH PROPER SAFETY PRECAUTIONS. USE AT YOUR OWN R AND USE COMMON SENSE.

- Always wear safety equipment such as helmet, knee pads and ell pads. Always wear a helmet when riding your scooter and keep t chinstrap securely buckled.

- Always wear shoes. Keep shoelaces tied and out of the way of wheels.

• Always maintain a hold on the handlebars.

- Do not use this product at night, poor weather (rain, snow or poor visibility) or around heavily populated areas (pavements, streets, muddy areas, rocky surfaces and slippery surfaces). It is recommended that you use this product in a park or other open space.

- The scooter should not be used on any other surface other than flat even ground. It is not designed for graveled roads, on grass surfaces or any other uneven surfaces as this could cause not on damage to scooter but also the rider.

- Never use near steps, sloped driveways, hills, roadways, alleys or swimming pool areas.

- This product is not a road vehicle and should be used for leisure purposes only.

- Do not take this scooter on the road or public highway.

- Brake will get hot from continuous use. Do not touch after brakir

- After checking that all parts are in good condition, remember to check that all the screws and wheels are tightly in place before the scooter.

- Replace worn or broken parts immediately.

  • Do not allow exceed 50 kilograms on the scooter.
  • The product is recommended for users of 3 years and up. Direct parental supervision is required.
    • The scooter may only be used by one rider at a time.
  • Do not use this product for jumping stunts or tricks.
  • Do not disassemble this product.
  • A parent's decision to allow his or her child to ride this product be based on the child's maturity, skill and ability to follow rules.

WARNING: ALWAYS INSPECT SCOOTER PRIOR TO RIDING

Properly inspecting and maintaining your scooter can reduce the risk injury.

PRODUCT DESCRIPTION

Technical diagram of a mechanical device with numbered components and an inset close-up showing a component assembly.

  1. Handlebar

  2. Grips

  3. Quick-release clamp

  4. Handlebarheightadjustmentbutton.

  5. Bumper

  6. Handlebar release button

  7. Front wheel

  8. Deck

a. Foot brake

  1. Rear wheel

HANDLEBAR ASSEMBLY/DISASSEMBLY

  1. Keep the handlebar release button pressed and push the handlebar into the opening at the front of the deck until it locks in place. Hear an audible click.

  2. To disassemble the handlebar, keep the handlebar release button pressed (it is now located below the front part of the deck at the height of the left wheel) and pull the handlebar upwards until it detaches from the deck.

Technical line drawing of a wheeled vehicle with a pull rod and head assembly, plus an inset close-up showing internal components (no text or symbols)

HANDLEBAR HEIGHT ADJUSTMENT

  1. Open the clamp.

  2. With one hand holding the handlebar, keep the handlebar height adjustment button pressed with the other hand and push the handlebar up or down until the button locks into the desired slot. Always make sure the button locks in one of the slots!

  3. Tightly close the clamp.

down ys

HOW TO RIDE

  1. Grip the grips with your hands, place one foot on the deck and other foot on the ground.

  2. Pay attention to your surroundings and make sure that your riding area is clear.

  3. Kick backwards with your foot beside the scooter to give you m

  4. Repeat this kicking action in order to stay in motion.

  5. To turn left or right lean your body and the handlebar left or ri

  6. To stop or slow down, place your kicking foot on the brake abc rear wheel or put your kicking foot on the ground.

  7. Do not over-steer as this could cause you to fall off the scooter.

Two identical diagrams of a manual lawn mower with wheels and directional arrows indicating motion (no text or symbols)

CLEANING AND MAINTENANCE

  • Wipe the product with mild detergent after use.
  • Do not leave this product in high temperature, intense sunlight or dusty areas.
  • Store it in a dry place.
    • Always make sure all screws and nuts are securely tightened before every use.

SPECIFICATION

General

3 handlebar height settings

Lean-to-steer system

Front bumper

Foot brake

Aluminum handlebar and comfortable grips

Non-slip deck

Solid and lightweight construction

Rubber wheels

Detachable handlebar

Technical data

Dedicated for: children aged 3 and above

Maximum load: 50 kg

Wheels: 3

Front wheels diameter: 122 mm

Rear wheel diameter: 100 mm

Adjustable handlebar height: 755 - 855 mm

Handlebar width: 250 mm

Deck dimensions (length x width): 280 mm x 120 mm

Wheelbase: 180 mm

Bearings: ABEC-9

Material:

Handlebar: aluminum

Wheels: PU

Deck: PP, nylon

Grips: soft PVC

In set: 2x hex wrench, user's manual

Physical parameters

Weight: 2,5 kg

Dimensions (length x width x height): 575 x 250 x 855 mm*

* Maximum height

LEARN MORE

For more information on this device visit: www.rebelelectro.com.

Read owner's manual carefully before using your device.

Visit www.rebelelectro.com website for more products and accessories.

Rebel ZAB0121 - LEARN MORE - 1

English

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

Rebel ZAB0121 - LEARN MORE - 2

(Applicable in the European Union and other European countries with separate collection systems). This marking shown on the product or its literature, indicates that it should not be disposed of other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally specific recycling. Business users should contact their supplier and check the terms and conditions of purchase contract. This product should not be mixed with other commercial wastes for disposal.

Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.

Technical diagram of a mechanical device with numbered components and an inset close-up showing a component labeled 3.

REGULACJA WYSOKOŚCI KIEROWNICY

UŻYTKOWANIE

CZYSZCZENIE I PRZECHOWYWANIE

REGLAREA ÎNĂLTÎMII GHIDONULUI

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Rebel

Model : ZAB0121

Category : Scooter