M3702 - Milling machine MAKITA - Free user manual and instructions
Find the device manual for free M3702 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Compact trim router |
| Brand | Makita |
| Model | M3702 |
| Power supply voltage | 230 V ~ 50 Hz |
| Rated power | 530 W |
| No-load speed | 30,000 rpm |
| Collet diameter | 6 mm |
| Maximum cutting capacity | 12 mm |
| Weight | 1.3 kg |
| Dimensions (L x W x H) | 210 x 120 x 190 mm |
| Cable length | 2.5 m |
| Protection class | II (double insulation) |
| Sound pressure level | 75 dB(A) |
| Sound power level | 86 dB(A) |
| Vibration level | 7.5 m/s² |
| Main functions | Chamfering, grooving, copy routing; use with guide or jig |
| Maintenance and cleaning | Clean ventilation slots; replace worn brushes (ref. CB-63) |
| Safety | Integrated spindle lock; switch with lock-off |
| Spare parts and repairability | Brushes, bearings, collet available; repairable by authorized center |
| General information | User manual included; compatible with standard 6 mm bits |
Frequently Asked Questions - M3702 MAKITA
How to change the bit on the Makita M3702?
Use the supplied wrench to lock the shaft via the spindle lock, loosen the collet nut, remove the old bit and insert the new one. Tighten firmly before use.
What is the maximum speed of the M3702?
The no-load speed is 30,000 rpm, fixed (non-variable).
Can I use 8 mm bits on the M3702?
No, the standard collet is 6 mm. There are optional 8 mm collets (ref. 763203-9), but check compatibility with your model.
How to maintain the router?
Regularly clean the ventilation slots with a soft brush. Replace the motor brushes when they measure less than 6 mm (ref. CB-63).
The router vibrates heavily, what should I do?
Check that the bit is tight and balanced. If vibrations persist, check the condition of the bearings or consult an authorized service center.
What is the maximum depth of cut?
The maximum cutting capacity is 12 mm per pass. For deeper cuts, make multiple passes.
Is the power cable replaceable?
Yes, but we recommend having the cable replaced by a Makita authorized professional to ensure safety.
Can I use the router with a vacuum cleaner?
Yes, the M3702 has a dust extraction adapter (not included) to connect to a vacuum cleaner.
How to adjust the routing depth?
Turn the depth adjustment knob located on top of the machine. Use the parallel guide for precise cuts.
Where to find the original manual?
The manual is available for free download on notice-facile.com or on the official Makita website.
User questions about M3702 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Milling machine in PDF format for free! Find your manual M3702 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M3702 by MAKITA.
USER MANUAL M3702 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : M3702
Category : Milling machine