GV-APOE2411-V2 - Network card / adapter Geovision - Free user manual and instructions
Find the device manual for free GV-APOE2411-V2 Geovision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power over Ethernet (PoE) Injector |
| Brand | Geovision |
| Model | GV-APOE2411-V2 |
| Dimensions (W x D x H) | 100 mm x 60 mm x 30 mm |
| Weight | 200 g |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Output Voltage | 48 V DC |
| Power Output | Up to 30 W (IEEE 802.3af/at compliant) |
| Ports | 1 x RJ-45 Data Input, 1 x RJ-45 Data+Power Output |
| Data Rate | 10/100/1000 Mbps |
| LED Indicators | Power and PoE status |
| Surge Protection | Yes, up to 4 kV |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Safety Certifications | CE, FCC |
| Maintenance | Wipe with dry cloth; keep away from moisture |
| Cleaning | Use soft, dry cloth; no liquids |
| Repairability | No user-serviceable parts; contact support |
| Spare Parts Availability | Contact Geovision or authorized resellers |
| General Information | Designed for indoor use; powers compatible PoE devices such as IP cameras and access points |
Frequently Asked Questions - GV-APOE2411-V2 Geovision
What is the GV-APOE2411-V2 used for?
It is a PoE injector that supplies power and data to compatible devices like IP cameras or wireless access points over a single Ethernet cable.
What are the power output specifications?
It provides 48 V DC output with up to 30 W power, compliant with IEEE 802.3af/at standards.
Can I use this injector with any PoE device?
It works with devices that support 802.3af/at standard PoE. Check your device specifications for compatibility.
How do I install the GV-APOE2411-V2?
Connect the injector to your network switch via the Data Input port, then connect the Data+Power Output port to the PoE device. Plug the power cord into an AC outlet.
What do the LED indicators mean?
A steady green LED indicates power is on. A yellow or orange LED shows PoE is active and delivering power to the connected device.
Is the GV-APOE2411-V2 suitable for outdoor use?
No, it is designed for indoor use only. Do not expose it to rain or moisture.
What safety precautions should I follow?
Use a grounded electrical outlet, avoid water contact, and do not open the device casing. Unplug during storms or if not in use.
How do I clean the injector?
Unplug the device and wipe with a soft, dry cloth. Do not use liquid or aerosol cleaners.
What should I do if the PoE device is not powering on?
Check the LED indicators on the injector. Ensure the Ethernet cable is properly connected and the power cord is plugged in. Verify the powered device is PoE compliant.
Where can I find spare parts or support?
Contact Geovision customer support or visit their website for replacement units. There are no user-replaceable parts inside.
User questions about GV-APOE2411-V2 Geovision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual GV-APOE2411-V2 - Geovision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV-APOE2411-V2 by Geovision.
USER MANUAL GV-APOE2411-V2 Geovision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Geovision
Model : GV-APOE2411-V2
Category : Network card / adapter