DTAV40IM - Switch INTERMATIC - Free user manual and instructions
Find the device manual for free DTAV40IM INTERMATIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mechanical 24-Hour Time Switch |
| Brand | Intermatic |
| Model | DTAV40IM |
| Rated Current | 40 A |
| Rated Voltage | 208-277 V AC, 50/60 Hz |
| Number of Circuits | 1 pole (SPST) or 2 poles (DPST) depending on wiring |
| Programming Type | Mechanical 24h display with hands and pins |
| Programming Resolution | 15 minutes per segment |
| Number of Cycles per Day | 1 to 12 cycles (depending on setting) |
| Power Reserve | Mechanical operation, no battery |
| Housing Material | Flame retardant plastic (UL94 V-0) |
| Protection Rating | IP20 (indoor use) |
| Dimensions (W × H × D) | 12.7 × 9.5 × 7.6 cm |
| Weight | 0.34 kg |
| Power Supply | Directly from mains (without battery) |
| Mounting Type | Wall or DIN rail |
| Cable Entry | 1/2" NPT |
| Connection Terminals | Screw terminals for wires up to 10 mm² |
| Main Functions | Programmed control of lighting, pump, ventilation |
| Maintenance and Cleaning | Wipe with a dry cloth; do not use solvents |
| Safety | Disconnect power before any intervention; use in accordance with electrical standards |
| Spare Parts and Repairability | No user-replaceable parts; contact a professional |
| Warranty | 1 year (parts and labor) |
| Certifications | UL, CSA |
Frequently Asked Questions - DTAV40IM INTERMATIC
How to set the time on the DTAV40IM?
Turn the dial manually clockwise until the current time matches the reference arrow. Do not force reverse movement.
How to program the on/off cycles?
Use the provided trippers: insert black trippers for ON periods and white trippers for OFF. Each tripper corresponds to a 15-minute interval.
Can I use this switch for a pool pump?
Yes, the DTAV40IM is designed for resistive and inductive loads up to 40 A, ideal for pool pumps, outdoor lighting, or fans.
Is the housing waterproof?
No, the protection rating is IP20. It is suitable only for indoor installation, away from moisture.
How to wire the DTAV40IM?
Refer to the provided wiring diagram. Generally, connect the phase to terminal L (common) and the load to terminal 1 (for SPST) or terminals 1 and 3 (DPST). Neutral is direct.
What to do if the switch does not follow the programming?
Check that the trippers are correctly inserted and the time is set properly. If the problem persists, the clock mechanism may be worn; consult an electrician.
Can I set multiple cycles per day?
Yes, you can use as many trippers as needed. The maximum number of cycles is limited by the dial capacity (12 cycles maximum).
Does the product require a battery?
No, operation is purely mechanical: a small synchronous motor drives the dial without a battery. Synchronization is lost after a power outage.
How to clean the housing?
Disconnect power, then wipe the housing with a soft, dry cloth. Never use liquid or abrasive cleaners.
Where to find the detailed wiring diagram?
The diagram is in the user manual provided. You can also download it for free from notice-facile.com by searching for model DTAV40IM.
User questions about DTAV40IM INTERMATIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual DTAV40IM - INTERMATIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DTAV40IM by INTERMATIC.
USER MANUAL DTAV40IM INTERMATIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INTERMATIC
Model : DTAV40IM
Category : Switch