RM10 - Speaker JBL - Free user manual and instructions
Find the device manual for free RM10 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | JBL |
| Model | RM10 |
| Dimensions (approx.) | 100 x 80 x 40 mm |
| Weight (approx.) | 200 g |
| Power Source | Built-in rechargeable Li-ion battery (3.7V, 800 mAh) |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 10 meters |
| Speaker Configuration | Full-range mono driver, passive radiator |
| Output Power | 5 W |
| Frequency Response | 100 Hz - 20 kHz |
| Battery Life | Up to 8 hours (depending on volume and audio content) |
| Charging Time | Approx. 2.5 hours |
| Charging Interface | USB-C |
| Water Resistance | IPX5 (splash-proof) |
| Controls | Power, Volume +/-, Play/Pause, Bluetooth pairing |
| Microphone | Built-in for hands-free calls |
| Material | Plastic with fabric cover |
| Accessories Included | USB-C charging cable, user manual |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use abrasive cleaners or immerse in water. |
| Safety Warnings | Do not expose to extreme temperatures, avoid dropping, keep away from liquids and small children. |
| Spare Parts & Repairability | Built-in battery non-user-replaceable. Refer to authorized service center for repairs. |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - RM10 JBL
How do I pair my JBL RM10 with my phone?
Turn on the speaker by pressing the power button. The Bluetooth LED will start flashing. On your phone, enable Bluetooth and search for 'JBL RM10' in the list. Tap to connect. If prompted for a PIN, enter 0000.
How long does the battery last?
The battery lasts up to 8 hours at moderate volume. Actual battery life may vary with volume level and audio content.
Is the speaker waterproof?
The JBL RM10 has an IPX5 rating, meaning it is splash-proof. It can withstand light rain or splashes but should not be submerged in water.
How do I charge the speaker?
Connect the provided USB-C cable to the speaker's charging port and a USB power source (e.g., wall charger or computer). The LED will turn red while charging and turn off when fully charged.
Can I use the speaker while charging?
Yes, you can play music while the speaker is charging. However, this may extend the charging time.
How can I reset the speaker?
To reset, press and hold the Bluetooth and Volume Up buttons simultaneously for about 5 seconds until the LED flashes. This will erase all paired devices.
What does the flashing red LED mean?
A flashing red LED indicates low battery. Please charge the speaker soon.
Can I connect two speakers together?
The JBL RM10 does not support JBL Connect+ or PartyBoost. It only pairs with one device at a time.
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use any chemicals, abrasive cleaners, or water directly on the speaker.
What should I do if the speaker is not turning on?
First, ensure the battery is charged. If still not turning on, try a reset by holding the power button for 10 seconds. If the issue persists, contact JBL customer support.
User questions about RM10 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual RM10 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RM10 by JBL.
USER MANUAL RM10 JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : RM10
Category : Speaker