RGS200-12P - Switch ZYXEL - Free user manual and instructions
Find the device manual for free RGS200-12P ZYXEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch with PoE+ |
| Number of Ports | 12 x 10/100/1000 Base-T (PoE+) + 2 x Combo SFP |
| PoE Budget | 120W total (max 30W per port) |
| Switching Capacity | 24 Gbps |
| Forwarding Rate | 17.9 Mpps |
| Dimensions (W x D x H) | 330 x 230 x 44 mm (13 x 9.1 x 1.7 in) |
| Weight | 3.0 kg (6.6 lbs) |
| Power Supply | AC 100-240V, 50-60 Hz, internal |
| Power Consumption | Max 150W (with PoE load) |
| Management Features | Web GUI, CLI, SNMP, VLAN, QoS, Link Aggregation, IGMP Snooping |
| Security Features | 802.1X, ACL, Port Security, Storm Control |
| Mounting | 19-inch rackmountable (brackets included) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 10% to 90% (non-condensing) |
| Cooling | Internal fan(s) |
| LED Indicators | Power, PoE, Link/Act, Speed |
| Cleaning and Care | Wipe with a dry, soft cloth; do not use liquids or solvents |
| Safety Precautions | Use only supplied power cord; avoid exposure to moisture; ensure proper ventilation |
| Spare Parts and Repairability | No user-serviceable parts; contact qualified technician for repairs |
Frequently Asked Questions - RGS200-12P ZYXEL
What is the PoE power budget of the ZyXEL RGS200-12P?
The ZyXEL RGS200-12P has a total PoE power budget of 120W, with up to 30W per port for PoE+ devices.
How do I access the web management interface?
Connect your computer to any port, set your IP to a static address in the same subnet (default: 192.168.1.x), then enter http://192.168.1.1 in your browser. Default login: admin/admin.
Can I mount the switch in a rack?
Yes, the RGS200-12P comes with 19-inch rackmount brackets that can be attached to the sides for installation in a standard equipment rack.
Does this switch support VLAN?
Yes, it supports 802.1Q VLAN configuration via the web interface or CLI, allowing up to 256 VLAN groups.
What is the maximum power consumption without PoE load?
Without PoE devices, the switch consumes approximately 30W. The maximum consumption with full PoE load is 150W.
How to reset the switch to factory defaults?
Press and hold the reset button on the front panel for about 10 seconds until the LEDs flash. The switch will reboot with factory settings.
What is the switching capacity of the RGS200-12P?
The switch has a switching capacity of 24 Gbps and a forwarding rate of 17.9 Mpps for wire-speed performance.
Can I use SFP modules for fiber connections?
Yes, the two combo SFP slots support 1000Base-SX/LX (or 100Base-FX) fiber modules for long-distance connections.
What are the safety precautions?
Use only the provided power cord. Do not expose the switch to moisture or liquids. Ensure adequate ventilation around the device. Unplug before cleaning.
Is the switch fanless?
No, the RGS200-12P has internal fans for active cooling. It is not completely silent but operates at a moderate noise level.
User questions about RGS200-12P ZYXEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual RGS200-12P - ZYXEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RGS200-12P by ZYXEL.
USER MANUAL RGS200-12P ZYXEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZYXEL
Model : RGS200-12P
Category : Switch