PD-9006G - Network Equipment Microchip - Free user manual and instructions
Find the device manual for free PD-9006G Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Single-port Gigabit PoE+ Injector |
| Brand | Microchip |
| Model | PD-9006G |
| Standards | IEEE 802.3af, IEEE 802.3at (PoE+) |
| Data Rate | 10/100/1000 Mbps |
| PoE Output Power | Up to 30W per port |
| PoE Output Voltage | 48V DC |
| Input Voltage | 100-240V AC, 50-60Hz |
| Dimensions (LxWxH) | 140 x 80 x 30 mm (5.5 x 3.1 x 1.2 in) |
| Weight | Approx. 200 g (7 oz) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, PoE Active |
| Protection | Overcurrent, Short-circuit, Overvoltage |
| Mounting | Desktop or wall-mountable |
| Safety Certifications | CE, FCC, RoHS |
| Warranty | 2 years limited |
| Package Contents | Injector, power cord, user manual |
Frequently Asked Questions - PD-9006G Microchip
What is the PD-9006G used for?
The PD-9006G is a single-port Gigabit PoE+ injector that supplies power and data to PoE-enabled devices such as IP cameras, wireless access points, and VoIP phones.
Does the PD-9006G support Gigabit speeds?
Yes, it supports 10/100/1000 Mbps (Gigabit Ethernet) data rates, ensuring high-speed connectivity.
What is the maximum power output?
The PD-9006G delivers up to 30W of PoE+ power, compliant with IEEE 802.3at standard.
Can I use the PD-9006G with non-PoE devices?
No, the injector only works with PoE-compatible devices. Non-PoE devices may be damaged if connected.
How do I install the PD-9006G?
Connect the injector to your network switch via the DATA IN port, then connect your PoE device to the DATA & POWER OUT port. Plug in the power adapter.
What do the LED indicators mean?
The Power LED shows if the injector is receiving power. The PoE Active LED lights when power is being delivered to the connected device.
Is the PD-9006G compatible with 802.3af devices?
Yes, it is backward compatible with IEEE 802.3af (PoE) devices, providing up to 15.4W.
What is the maximum cable length?
The PD-9006G supports standard Ethernet cable lengths up to 100 meters (328 feet).
How do I clean the PD-9006G?
Disconnect power and wipe the exterior with a soft, dry cloth. Do not use liquids or abrasive cleaners.
What safety certifications does the PD-9006G have?
It is certified with CE, FCC, and RoHS, ensuring compliance with international safety and environmental standards.
User questions about PD-9006G Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network Equipment in PDF format for free! Find your manual PD-9006G - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PD-9006G by Microchip.
USER MANUAL PD-9006G Microchip
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Microchip
Model : PD-9006G
Category : Network Equipment